David S. Wilkinson

David S. Wilkinson

Provost and Vice-President (Academic)

MCMASTER UNIVERSITY
CURRICULUM VITAE


Personal



NAME: David S. Wilkinson, Provost and Vice-President (Academic)

DATE COMPILED: Revised 30 November 2011

ADDRESS:

McMaster University
1280 Main Street West
Hamilton, Ontario
Canada L8S 4K1

TELEPHONE:

(905) 525-9140, ext. 24301

E-MAIL:

provost@mcmaster.ca

FAX:

(905) 546-5213

WEBSITE:

www.mcmaster.ca/vpacademic

Education

B.A.Sc.
(Bachelor of Applied Science), 1972
University of Toronto, Canada
Engineering Science Program; Metallurgy Option
M.A.Sc.
(Master of Applied Science), 1974
University of Toronto, Canada
Dept. of Metallurgy and Materials Science
Thesis Title: "Diffusional Stress Relaxation in Solid Fibres"
Supervisor: G.C. Weatherly
Ph.D.
(University of Cambridge, England, 1978
Department of Engineering
Thesis Title: "The Mechanisms of Pressure Sintering"
Supervisor: M.F. Ashby, FRS

Employment History

1978 - 1979
University of Pennsylvania, Philadelphia, U.S.A.

Post-doctoral Fellow
Supervisors: V. Vitek, D.P. Pope

1979 - present
McMaster University, Hamilton, Canada

Assistant Professor - 1979
Awarded tenure - 1983
Promoted to Associate Professor - 1983
Department Chair July, 1987 - July, 1991
Promotion to Full Professor - 1988
Acting Chair July, 1997 - July, 1998
Acting Chair July, 2000 - July, 2001
Dean of Engineering, April 2008 - June 2012
Provost and Vice-President (Academic), July 2012 - present
Distinguished University Professor (lifetime appointment), eff. June 2008

1985 - 1986
Max Planck Institut fur Metallforschung, Stuttgart, Germany

Visiting scientist

1992 - 1993
University of California, Santa Barbara, CA, USA

Visiting scientist

1997
Institut Nationale des Sciences Appliqués de Lyon, France

Professeur invité

2004 - 2005
Institut Nationale des Sciences Appliqués de Lyon and Institut Nationale Polytechnique de Grenoble, France

CNRS Visiting Fellow

Awards and Fellowships

1985-1986
Alexander von Humbolt Foundation Fellowship for research in Germany, held at the Max Planck Institute for Materials Science, Stuttgart
1996
Elected Chair, Gordon Research Conference on Solid State Studies in Ceramics
1996
Best Materials Paper, Canadian Metallurgical Quarterly
1999
Fellowship of the Canadian Institute of Mining, Metallurgy and Petroleum
2000
2000 Fellowship of the American Ceramic Society
2000
2000 Ross Coffin Purdy Award of the American Ceramic Society - for the best paper published in the ceramic literature (world-wide) in 1998
2000
2000 Invited Visiting Fellowship, Japan Society for the Promotion of Science, held at University of Tokyo
2003
CIM Distinguished Lecturer Award
2004
Canadian Materials Physics Medal
2004
Dofasco Award of the Metallurgical Society of CIM
2004
CNRS (France) Visiting Fellowship
2005
Visiting Fellowship, INPG France
2008
Distinguished University Professor, McMaster University
2009
Fellowship of the Royal Society of Canada
2010
Fellowship of the Canadian Academy of Engineering
2012
Rio Tinto Alcan Award of the Metallurgical Society of CIM
2013
Hall of Distinction Award, Faculty of Engineering, University of Toronto
2014
TMS Light Metals Division Magnesium Technology Best Student Paper – Supporting Author Award (with M. Nemcko, PhD student)
2015
Honorary Symposium, International Conference on Plasticity
2015
DKC MacDonald Lectureship, Canadian Materials Science Conference
2015
Honorary Symposium, Metallurgical Society of Canada Annual Conference
2016
McMaster Faculty of Engineering Research Award
2016
Silver Medal Award of the Metallurgy and Materials Society of CIM

Courses Taught

Undergraduate

Eng. 1D03
Engineering Computation
Eng. 1C04
1st Year Departmental Design Project
Mater. 1M03
Structure and Properties of Materials
Sci 1S03
1st Year Inquiry Course, Faculty of Science
Eng. 2O03
Properties of Engineering Materials
EngSoc 2Y03
Case Studies in the History of Technology
Mater. 3E04
Mass Transfer
Mater. 3E06
Transport Processes: Heat Transfer and Solid State Mass Transport
Eng. 3P03
Mechanical Properties of Materials
Mater. 3P03/3M03
Mechanical Properties of Materials
Eng. 3Q03
Electronic Properties of Materials
Mater. 4A02
Plant visits and Seminars
Mater. 4L04
Metallurgy Laboratory: Fracture Toughness Experiment
Met. 4M03/6M03
Dislocation Theory, jointly with J.D. Embury
Mater. 4K04
Undergraduate Thesis (1-2 thesis students supervised each year).
Mater. 4R03
Ceramic Science
Mater. 4T03
Properties and Processing of Composites
EngSoc 4X03
Final Inquiry, Engineering and Society program
Mater. 4Z04
Capstone Industrial design Project

Graduate

MSE 716*
Fundamentals of Deformation and Fracture
MSE 717*
Mechanisms and Mechanics of Fracture, jointly with J.D. Embury
MSE 720*
Deformation and Fracture at Elevated Temperatures
(also taught at University of California - Santa Barbara, 1992)
MSE 754#
Fracture Mechanics
MSE 753#
Fracture Mechanisms
MSE 755#
Deformation of Crystalline Solids

Note: * indicates half-year while # indicates quarter-year graduate courses

Contributions to Teaching

Eng. 1D03
Engineering Computation - This was the first course on computation to be developed by the Engineering faculty at McMaster University
Original course development, along with Profs. A. Smith, J. Siddall and C. Crowe (1981)
Booklet: "The Sharp PC-1211 Pocket Computer: An Introduction for Students in Engineering 1D3" (1981).
Book: "BASIC Language Programming for Engineers" by D.S. Wilkinson (1983).
Course co-ordinator (1984, 1985, 1987).
Mater. 4L04
Development of new 5-afternoon laboratory on fracture mechanics (1983)
Mater. 4L02
Development of a 12-week laboratory sequence on processing and properties of ceramic materials (1999)
Mater. 3E06/3E04
Development of an undergraduate textbook, "Mass Transport in Solids and Fluids", published in the Solid State Science series by Cambridge University Press (2000)
Mater. 1M03
Development of a new introductory materials course offered for the first time to all students in Level I in January 2004. Now taught to about 1000 students each year

Led the course development team consisting of three faculty and about 15 summer students and TAs over two years

Course development using WebCT, web-based homework, active learning strategies in the classroom, interactive tutorials (2002)

University Committees and Appointments

Department -
Department Chair (1987-1991), Acting Chair (1997-98, 2000-01)
Consulting Review Committee (1980-1985, 1987-1991)
Chair Selection Committee (1981, 1984, 1987, 2002)
Graduate Advisor / Chair, Grad Admissions (1993-96, 2004)
Faculty appointment committees (numerous)
Faculty of Engin. -
Dean's Advisory Committee on Computing (1979-1986, 1998-99)
Graduate Curriculum and Policy Committee (1983-1985)
Level I Operating Committee (1983-1987, 2002-)
Instruction Co-ordinating Committee (1983-1985)
Committee to Appoint Associate Dean (1984, 2002)
Dean's Council (1987-1991, 1997-1998, 2000-2001)
Ad Hoc Committee on Faculty Goals and Objectives (1989)
Undergraduate Admission and Recruiting Committee (1991-1992)
Awards Committee (1991-1992)
Graduate Admissions and Study Committee (1993-1996)
Selection Committee, Dean of Engineering (1993)
Engineering and Society Operating Committee (1993-2000)
Selection Committee, Chair of Mechanical Engineering (1996)
Engineering and Society Curriculum Committee (1999-2000)
Ad Hoc Committee on Restructuring Level I (2001/2)
Director of the McMaster Centre for Automotive Research (2002-2011)
Selection Committee, Director of Engineering and Society Program (2003)
Director, McMaster Manufacturing Research Institute (2005-2008)
Dean, Faculty of Engineering (2008-present)
Faculty of Science -
Dean's Advisory Committee on Computing (1979-1985)
Committee to Appoint Assistant Dean of Studies (1982, 1983)
Library User's Committee (1983-1985)
Faculty Council (1987-1991, 1997-1998, 2000-2001)
Selection Committee, Dean of Science (1989)
University -
Graduate Council (1982-1985; 1994-1996)
Executive of Graduate Council (1984/85, 1995/96)
Selection Committee - Director, Institute for Materials Research (1991, 2001)
Selection Committee, Vice-President, Research (1989, 1994, 2016)
Board-Senate Research Misconduct Hearings Panel (1997-2006)
Engineering Representative on Faculty of Humanities (1995-2001)
Tenure Appeal Tribunal (1999)
Selection Committee, Associate Dean of Graduate Studies (2001)
Engineering Representative on Faculty of Science (2003 - 2008)
Task Force to Develop New Operating Budget Model (2007- 2009)
University Senate (2008 - 2017)
University Planning Committee (2010/11, 2012 - 2017)
President's Advisory Committee on the DeGroote School of Business (2010-12)
Selection Committee, Dean of Business (2011-12)
University Provost (2012 - 2017)
As Provost, chair of: University Planning Committee; Provost's Council; numerous selection committees for positions which report to the Provost As Provost, member of: University Senate; University Board of Governors; Finance Committee of the Board; Planning and Building Committee of the Board; several President's advisory bodies
President's Advisory Committee on Fossil Fuel Divestment, chair (2016-17)
Committee on Academic Structures for Student Success, chair (2016-17)
Provincial/Federal -
Ontario Council of Academic Vice-Presidents (2012 - 2017)
U15 Academic Advisory Committee (Provost's Forum) (2012 - 2017)
Vice Chair (2012 - 2014); Chair (2014 – 2016)
Ontario Universities Council on Quality Assurance (2013 - 2015)
Technical Working Group on the Funding Formula (2016)
Technical Working Group on the Tuition Framework (2016)

Professional Organizations

Professional Engineers of Ontario
(registered as a Professional Engineer in the Province of Ontario)
Ontario Society of Professional Engineers
Metallurgical Society of CIM
ASM International
Metallurgical Society (TMS) of AIME
American Ceramic Society

Scholarly and Professional Activities

Journal Referee for Acta Materialia, Metallurgical Transactions, Scripta Materialia, Materials Science and Engineering. Transactions of TMS-AIME, Canadian Metallurgical Quarterly, Journal of the American Ceramic Society, Journal of the Canadian Ceramic Society, Journal of the American Society of Mechanical Engineers (and numerous others).

Proposal Referee for National Science Foundation, USA

American Society of Metals - Member of Council, Ontario Chapter (1980-82):
Chairman of Membership Committee, 1980-81
Chairman of Education Committee, 1981-82
Organized ASM Education Night at McMaster, 1981
Organized one-day seminars:
i) Metallurgy of Zirconium and Titanium Alloys, McMaster University 1981.
ii) Workshop on Fracture Mechanics, University of Toronto, 1981.

Metallurgical Society of CIM - Member of Materials Engineering Section Committee, (1983-1992, 1992 - 1998 as Associate Member):
Section Chairman (1988/89)
Member of Board of Governors of Metallurgical Society (1988/89)
Organization of two sessions for Annual Meeting, 1985
Member of Met. Soc. Continuing Education Committee (1986/87)
Chair, International Symposium on Advanced Materials, Conference of Metallurgists (Montreal, 1988), editor of proceedings (Pergamon Press).
Chair, Symposium on Advances in Industrial Materials, Conference of Metallurgists (Calgary, 1998), editor of proceedings (CIM).
Chair, Symposium on Materials for Lightweight Vehicles, Conference of Metallurgists (Hamilton, 2004)
Chair, Symposium on Materials for Lightweight Vehicles, Conference of Metallurgists (Winnipeg, 2008)

International Working Group for Superplasticity, member (1985-1994):
organizing committee for international conferences in Grenoble (1985) Blaine, WA. (1988), Osaka (1991); Moscow (1994).

Journal of the American Ceramic Society, Associate Editor (1990 - 2001)

4th Canadian Materials Science Conference, Co-chair, Royal Military College, Kingston, June 1992

Z. S. Basinski International Symposium on Crystal Plasticity, Chair, Royal Military College, Kingston (1992)

McMaster Powder Processing Facility, Director (1992 - 2008)

NSERC Strategic Project Grants Selection Panel for Materials Technologies
Member (1995-97)
Panel Chair (1997)

Canadian Ceramic Society
Board of Directors (1995-97)
Chair of Basic Science Section (1996/97)

Gordon Research Conference on Solid State Studies in Ceramics
Conference Chair, 1996

Member of Conference Organizing Committees:
Member of International Advisory Committee for 7th International Symposium on Ceramics (Bologna, 1988).
Engineering Foundation Conference on Plastic Deformation of Ceramics, Snowbird, UT, August 1994
International Conference on Composite Materials - 10, Whistler, BC, August, 1994
7th International Conference on Intergranular and Interphase Boundaries in Materials, Lisbon, Portugal, June, 1995
Sintering ‘95, Penn State University, September, 1995
Ceramic Processing ’97, Santa Barbara, September, 1997
Composites at Lake Louise (CALL) ’97, October, 1997
Composites at Lake Louise (CALL) ’99, October, 1999
Conference on Structural Ceramics and Ceramic Composites for High Temperature Applications, Spain, 2001
Composites at Lake Louise (CALL) ’05, October, 2005
Symposium on Materials for Lightweight Vehicles, MetSoc, 2008

McMaster Centre for Automotive Materials, Founding Director (2000 - 2007)

Academic User Access Facility, MTL-CANMET
Principal investigator NSERC MFA grant funding this facility
Chair, Management Committee, 2003 - 2007
Ex officio member, MTL Advisory committee (MATTAC), 2004- 2007

Co-chair, Symposium in honour of David Embury, McMaster 2004

McMaster Manufacturing Research Institute, Director (2005 - 2008)

McMaster Institute for Automotive Research and Technology - MacAUTO, Director (2007 - 2011)

Professional Teaching

Metallurgy II, Year 2 of the Certificate in the Metallurgy of Iron and Steel; McMaster University, Fall 1981.

Certificate in the Metallurgy of Iron and Steel, Program chair, 1998 – 2002
Level II coordinator, 2003 – 2007

Supervisorships

Students completed

Master's
Graduated in
G. Burger
1981, transferred to Ph.D.
A.G. Robertson
1984, transferred to Ph.D.
D. Pelemo
1985, graduated with MSc.
M. Chadwick
1987, transferred to Ph.D.
I. Arita-Watanabe
1990, graduated with M.Sc. (joint with G. R. Purdy)
Wei Chen
1991, graduated with M. Eng.
R. Ham-Su
1991, transferred to Ph.D.
D. Bloyce
1993, graduated with M. Eng.
K. Conlon
1993, transferred to Ph.D.
D. Sabljic (Clayton)
1993, transferred to Ph.D.
Q. Jin
1995, graduated with M. Eng. (joint with G. C. Weatherly)
D. Manomaisupat
1995, graduated with M. Eng. (joint with A. Petric)
D. Sarafinchan
1995, graduated with M. Eng.
J. Clarke
1997, graduated with M. Eng.
P. Poruks
1998, graduated with M. Eng. (joint with J. D. Embury)
J. Nychka
1999, graduated with M. Eng.
D. Xu
2001, graduated with M. Eng. (joint with G. C. Weatherly)
J. Gimple
2001, graduated with M. Eng. (joint with J. D. Embury)
S. Girard
2002, graduated with MASc
A. Limarga
2002, transferred to Ph.D. (joint with G C. Weatherly)
V. Oswell
2005, graduated with MASc (joint with J. D. Embury)
T. Singh
2005, graduated with MASc
E. McNally
2003, transferred to Ph.D. (joint with I. Zhitomirsky)
H. Herdawandi
2006, graduated with MASc (joint with M. Niewczas)
D. Zdravecky
2007, graduated with MASc (joint with M. Jain)
X,Yan
2007, graduated with MASc (joint with D. Malakhov)
D. Bielby
2008, graduated with MASc
S. Khiev
2009, graduated with MASc
K. Dunnett
2009, graduated with MASc
M. Zhan
2009, graduated with MASc
G. Zhu
2009, graduated with MASc
M. Nemcko
2011, transferred to Ph.D.
F. Anor
2010, transferred to Ph.D.
J. Li
2013, graduated with MASc.
Z. Yang
2015, graduated with MASc
Ph.D.
G. Burger
1986 (joint with J.D. Embury)
A.G. Robertson
1989
M. M. Chadwick
1990
S. F. Corbin
1992
I. Arita-Watanabe
1994 (joint with V. Castano, Natl. Univ. of Mexico)
R. Ham-Su
1997
Q. Jin
1998 (joint with G. C. Weatherly)
K. Conlon
1998
J. Gammage
2002 (joint with J. D. Embury)
T. Quan
2004
A. Limarga
2006
A. Weck
2007
M. Abou-Katwa
2009 (joint with D. Malakhov)
A. Hosokawa
2010
J. Kong
2012 (joint with N. Provatas)
M. Nemcko
2015

Current students

Master's
Began
L. Zhou
2015
D. Salehiyan
2016

Post-doctoral

C.H. Caceres
January 1981 - August 1983.
S.B. Biner
December 1981 - November 1983
R. Jupp
July 1985 - August 1987
H. Zeizinger
October 1986 - September 1987
K. Plucknett
December 1989 - December 1992
H. Grazzini
October 1990 - July 1992
S. Tuffe
December 1991 - June 1994 (joint with T. Coyle, Toronto)
I. Arita
August 1994 - November 1996
X.G. Ning
September 1994 - August 1996 (joint with G. C. Weatherly)
X. Zhang
February 1995 - May 1996 (joint with T. Coyle, Toronto)
C. Tian
June 1995 - January 1997 (joint with G. Irons and S. Zhu)
E. Maire
September 1995 - October 1996 (joint with J. D. Embury)
V. Yarashenko
June 1996 - December 1997 (joint with T. Coyle, Toronto)
H. Huang
May 1998 - July 2000 (joint with G. C. Weatherly)
J. Sarkar
June 1999 - August 2001 (joint with J. D. Embury)
G. Fox-Rabinovich
February 2000 - April 2004 (joint with G. C. Weatherly)
K. Hussain
2000 - March 2002 (joint with G. C. Weatherly)
A. Zaitsev
July 2000 - May 2002 (joint with G. C. Weatherly)
H. Azari
October 2000 - August 2004 (joint with J. D. Embury)
F. Shojai
April 2001 - August 2001 (joint with G. C. Weatherly)
M. Braccini
November 2000 - August 2001
V. Chani
October 2001 - December 2003 (joint with G. C. Weatherly)
J. Olurin
January 2002 - February 2003 (joint with G. C. Weatherly)
J. Li
April 2002 - December 2002 (joint with J. D. Embury, M. Jain)
J. Kang
April 2002 - July 2007 (joint with J. D. Embury, M. Jain)
Y. Liu
August 2002 - November 2004
L. Gutkin
April 2003 - April 2004 (joint with J. D. Embury, M. Jain)
X. Duan
March 2003 - December 2005 (joint with M. Jain, D. Metzger)
Y. Ososkov
August 2003 - March 2006 (joint with M. Jain, J. D. Embury)
H. Muto
February 2005 - February 2006
G. Fox-Rabinovich
October 2005 - June 2008 (joint with S. Veldhuis)
X. Hu
January 2006 - August 2010 (joint with M. Jain)
G. Cingara
June 2006 - December 2008 (joint with M. Jain)
A. Davidkov
April 2008 - March 2009 (joint with M. Jain)
Z. Keshavarz
May 2009 - October 2010
J. Kang
September 2008 - April 2011
E. Bellhouse
May 2011 - June 2011 (joint with J. McDermid)
Y. Lu
November 2011 - March 2014 (joint with J. McDermid)
A. Ray
November 2013 – September 2015
M. Nemcko
July 2015 – December 2015
S. Nagarajan
September 2015 – September 2016 (joint with M. Jain)
J. Samei
April 2016 –
D. Saha
November 2016 –

Visiting Scholars

Wu Xin
August 1984 - November 1986
Li Shujie
March 1986 - April 1988
Qingwu Cai
September 1993 - October 1994
Peter Vomacka
July - December 1995
S. Lampfenscherf
September - December 1997
V. Subbotin
January - February 2000

Research Technicians/Engineers

T. Castillo
1981 - 1992 (joint with J.D. Embury)
E. McCaffery
1984 - 1989
C. Barry
1988 - present
D. Bloyce
1993
D. Culley
2000 -2003
R. Lemmon
2003 - 2010

Visiting Scientists

C.H. Caceres
January, 1989 - October 1991 (U. of Cordoba, Argentina)
G. Kutty
May 1998 - June 1999 (joint with J. D. Embury)
E. Rauch
September 2001 - August 2002 (INPG, France) (with J. D. Embury)
S.-B. Kong
June - August 2004 (Inst. of Machinery and Materials, Korea)
M. Pindera
September 2004 - May 2005 (Univ. of Virginia)

Research Funding

* indicates current funding

all grant levels are annual award levels, except where noted.

*NSERC Discovery Grant, 2012 (5 years)

$41,000
Title: Mechanical Behaviour of Materials with Complex Microstructure

*NSERC CRD Grant, 2011 (4 years)

(PI: Mukesh Jain)
~$72,500; $55,704; $55,176; $60,000
Title: Formability Enhancements of Automotive CC and DC Magnesium Sheet Materials Using Prestrain Annealing Technology

*NSERC Strategic Network Grant, 2008 (5 years)

(PI: W. Poole, UBC)
~$1,000,000 per year
Title: Developing Magnesium Materials for the Transportation Sector

NSERC Discovery Grant, 2007 (5 years)

$58,000
Title: Mechanical Behaviour of Materials with Complex Microstructure

AUTO21 NCE, 2007 (2 years)

(with M. Jain and J. D. Embury)
$43,000
Title: Hydroforming of Advanced High Strength Steels

AUTO21 NCE, 2007 (2 years)

(with D. Malakhov)
$67,000
Title: Chemically Enhanced Formability of Automotive Aluminum Alloys”

NSERC Strategic, 2005 (3 years)

(with S. Veldhuis) $101,200; $94,200; $99,200 Title: Oxidation and protection of Ti and TiAl- based alloys for aerospace applications

NSERC CRD / GM Canada, 2005 (3 years)

(with M. Jain, M. Niewczas)
$228,500; $228,500; $147,000
Title: Optimization of sheet formability derived from microstructurally based models

AUTO21 NCE, 2005 (2 years)

(with M. Jain and J. D. Embury)
$43,000
Title: Hydroforming of Advanced High Strength Steels

AUTO21 NCE, 2005 (2 years)

(with D. Malakhov)
$100,000
Title: Chemically Enhanced Formability of Automotive Aluminum Alloys"

NSERC Strategic Grant, 2004 (3 years)

(with I. Zhitormirsky)
$90,000; $96,500; $89,000
Title: Materials and Processes for Electrochemical Supercapacitors

INCO / MMO, 2003 (1 year)

(with G. C. Weatherly)
$60,000
Title: Processing and Properties of Filamentary Nickel Powders

NSERC CRD / GM Canada, 2002 (3 years)

(with M. Jain, M. Niewczas, D. Metzger and J. D. Embury)
$111,900; $130,400; $116,900
Title: Microstructurally Based Modeling of Formability Related to Automotive Sheet

NSERC Discovery Grant 2002 (5 years)

$73,700
Title: Mechanical Behaviour of Materials with Complex Microstructure

INCO / MMO, 2001 (2 years)

(with G. C. Weatherly)
$60,000
Title: Optimizing the Properties of Nickel Foams

AUTO21 NCE, 2001 (3 years)

(with M. Jain and J. D. Embury)
$54,295
Title: Metallurgical Aspects of Tube Hydroforming

INCO / MMO, 2000 (2 years)

(with G. C. Weatherly)
$200,000
Title: Processing and Properties of Filamentary Nickel Powders

NSERC Strategic Project,1999 (3 years)

Partner: Pratt & Whitney Canada
(with G. C. Weatherly)
$175,816
Title: Creep and Scale Formation in Titanium Aluminides

NSERC Research Grant 1998 (4 years)

$52,091
Title: Mechanical Behaviour of Materials with Complex Microstructure

Pratt & Whitney Canada Ltd., 1998 (3 years)

(with G. Weatherly, D. Embury, P. Nicholson and M. Elbestawi)
$513,884
Title: The Influence of Machining-Induced Residual Stresses on the Fatigue of Waspaloy

Caterpillar, Inc., 1998

$52,000
Title: Processing Optimization Related to Near Net Shaping of Ceramics

MMO, 1998 (3 years)

Partner: Alcan
$73,250
Title: Ductility of Automotive Al Alloys

Caterpillar, Inc., 1997 (18 mos.),

$74,000
Title: Processing Optimization Related to Near Net Shaping of Ceramics

NSERC Strategic Project, 1997 (3 years)

Partner: Alcan
$117,575
Title: Failure Prediction in Commercial Al Alloys for Automotive Applications

Canadian Space Agency Contract 1994 (1 year), subcontract via Cametoid Advanced Technologies Inc.

$20,009
Title: Novel Functionally Gradient Composite Materials for Critical High Performance Applications - A Feasibility Study

Caterpillar, Inc., 1994 (3 years),

$69,000 (year 1), $39,000 (years 2 and 3)
Title: Processing Technology Related to Near Net Shaping of Ceramics

NSERC Research Grant 1994 (4 years)

$42,271
Title: Processing and Properties of Structural Materials

NSERC University/Industry Grant, 1994 (3 years),
part of multi-university program on MMC's

Partners: Alcan, INCO, Ontario Hydro
$19,000
Title: Functionally Graded Metal Matrix Composites

OCMR, 1993 (1 year)

$198,000
Title: Functionally Graded Ceramic Materials

NSERC Operating Grant, 1991 (3 years)

$46,500
Title: Processing and Properties of Structural Materials

NSERC University/Industry Grant, 1990 (3 years), part of multi-university program

Partners: Alcan, INCO, Ontario Hydro
$25,000
Title: Mechanical Behaviour of Metal Matrix Composites

Department of Energy, Mines and Resources and NSERC, 1990 (2 years)

$13,500
Title: Mechanical Behaviour of Metal Matrix Composites

OCMR, 1990 (2 years)

$60,000
Title: Hot Isostatic Processing

Ontario Joint research with Rhone-Alpes, France, Premier's Council, 1990 (2 years)

$154,000
Title: Superplastic Alumina/Zirconia Laminates

NSERC Operating Grant, 1988 (3 years)

$38,600
Title: Damage Processes in Ceramics and Metals at High Temperatures

NSERC Strategic Grant, 1988 (3 years) with 5 others; P.I.: J.D. Embury

Partner: Alcan
$89,160; $78,160; $71,160
Title: Electron Microscopy of Interface and Composites

Imperial Oil, 1988 (3 years)

$10,000
Title: Strength and Toughness of Metal/Ceramic Interfaces

URIF 1987 (3 years)

$40,000
Matching award for Alcan grant

NSERC Special Operating Grant (1987), with 4 others; P.I.: J.P. Carbotte

$79,900
Title: Research on High Tc Superconductors

NSERC Strategic Grant, 1987 (3 years), with 5 others; P.I.: J.P. Carbotte

$145,938; $145,138; $138,038
Title: Study of Superconductivity in the High Tc Oxides

Department of Energy, Mines and Resources, 1987 (3 years), with J.D. Embury

$10,000
Title: Mechanical Behaviour of Metal Matrix Composites

NSERC Operating Grant, 1987 (1 year)

$28,877
Title: Damage Processes in Ceramics and Metals at High Temperatures

CFFTP, 1987 (2 years)

$30,000
Title: Effect of Helium Bubble Formation on High Temperature Fatigue

Alcan, Intl., 1987 (3 years )

$40,000
Title: Microstructure Evolution in Nitride Ceramics at Elevated Temperatures

CFFTP, 1986 (1 year)

$30,000
Title: Effect of Helium Bubble Formation on High Temperature Fatigue

NSERC Operating Grant, 1984 (3 years)

$30,980
Title: Mechanical Properties of Materials at Elevated Temperatures

NSERC Strategic Grant, 1984 (3 years)

$53,811; $57,731; $60,081
Title: Ceramic Materials for Heat Engine Applications

NSERC Operating Grant, 1983 (1 year)

$15,688
Title: Mechanical Properties of Materials at Elevated Temperatures

Imperial Oil, 1983 (2 years)

$8,000
Title: Influence of Microstructure on Creep Crack Growth

Department of Energy, Mines and Resources, 1982 (2 years)
$7,000; $10,000

Title: The Role of Impurities on Creep Fracture of Low Alloy Steel

DSS Contract, 1981 (2 years)

$79,020 (for 2 years)
Title: Materials and Design for Resistance to Crack Growth by Creep, Phase II

NSERC Operating Grant, 1980 (3 years)

$8,500; $9,350; $10,799
Title: Mechanical Properties of Materials at Elevated Temperatures

Department of Energy, Mines and Resources, 1980 (2 years)

$2,000; $5,500
Title: Effect of Impurities on Creep Ductility of 2 Cr-1 Mo Steel

Imperial Oil, 1980 (3 years)

$6,000; $7,000; $8,000
Title: Grain Boundary Crack Growth at Elevated Temperatures

DSS Contract, 1980 (1 year)

$10,000
Title: Materials and Design for Resistance to Crack Growth by Creep, Phase I

Equipment Grants

NSERC, 2005 (with several others)

$150,000
Microanalysis tools for scanning electron microscopy

NSERC, 2005 (PI: M. Niewczas)

$58,781
Heat capacity upgrade

NSERC, 2001 (with G. C. Weatherly)

$91,435
Digital dark field STEM detector

Canadian Foundation for Innovation, 2000

$450,000
Mechanical test facility upgrade, new furnaces
(part of larger funding award)

NSERC, 1999 (with J. Lott)

$25,166
Data Acquisition System for In Situ Tensile Stage on ESEM

NSERC, 1998 (with J. D. Embury, P. S. Nicholson and T. W. Coyle)

$151,609
Vacuum Hot Press - Upgrade and Overhaul

NSERC, 1996

$75,387
Creep testing of ceramic materials under tensile loads

NSERC, 1988 (with 5 others); P.I.: D.S. Wilkinson

$99,500
Title: Quantitative Image Analysis System

OCMR, 1988-90 (with P. S. Nicholson)

$500,000 (approximate)
Ceramic processing facility

NSERC, 1983 (with 3 others); P.I.: J.D. Embury

$93,379
Title: Servo-Hydraulic Testing Machine

BILD, 1983 (with 3 others); P.I.: J.D. Embury

$65,800
Title: Servo-Hydraulic Testing Machine

NSERC, 1983

$37,525
Title: Ceramic Creep Testing Facility

Facility Awards

*Canadian Foundation for Innovation, 2009

$$6,826,277 (McMaster portion)
PI: M. Worswick (U Waterloo), J. McDermid (McMaster PI)
Lightweight automotive structures

*NSERC Major Research Support Grant, 2008 (3 years)

$265,000
(P.I. H. Henein with 8 others)
Academic User Access Facility at MTL-CANMET Laboratory

*Ontario Research Fund - Research Excellence Award, 2006 (5 years)

$46.5 million over 5 years
(P.I: D. Wilkinson)
Title: Initiative for Automotive Manufacturing Innovation
Note: this is a large interdisciplinary project involving 30 professors from McMaster University and University of Waterloo and 35 industrial partners

NSERC Major Research Support Grant, 2007 (1 year)

$265,000
(P.I. H. Henein with 8 others)
Academic User Access Facility at MTL-CANMET Laboratory

NSERC Major Facilities Access Grant, 2003 (3 years + 1 year extension)

$265,000
(PI: D.S. Wilkinson with 8 others)
Academic User Access Facility at MTL-CANMET Laboratory

Ontario Research and Development Challenge Fund, 2002 (5 years)

Sponsor: Alcan, INCO, others
($8,935,735 over 5 years)
(with G. Weatherly, D. Embury, G. R. Purdy, M. Niewczas and D. Metzger)
Title: McMaster Centre for Automotive Materials

Invited/Keynote Lectures

  1. From Sintering to Fracture: A Short History of Holes, David Taplin Honorary Symposium, International Conference of Fracture, ICF14, Rhodes, June 2017
  2. Damage and Fracture in Magnesium, Symposium in honour of Dr. R. Mishra, part of Plasticity 2017, Mexico, January 2017
  3. Damage and Fracture in Metals, Symposium on Physics and Mechanics of Ductile Failure: Modeling and Experiments, American Society of Mechanical Engineering (ASME) International Mechanical Engineering Congress & Exposition (IMECE), Phoenix, November 2016
  4. Microstructural Investigation of Damage and Fracture in Pure Magnesium, Symposium on Ductile Damage and Fracture, 15th European Mechanics of Materials Conference (EMMC15), Brussels, September, 2016
  5. From Sintering to Fracture: A Short History of Holes, Brockhouse Institute seminar, McMaster, December 2015
  6. Void Controlled Fracture in Pure Metals, D.S. Wilkinson Honorary Symposium, Conference of Metallurgists, Toronto, August 2015
  7. From Sintering to Fracture: A Short History of Holes, D.K.C. MacDonald Lecture, plenary address, Canadian Materials Science Conference, Halifax, June 2015
  8. Void Coalescence in FCC and HCP Metals, IUTAM Symposium on Ductile Fracture, Paris, March 2015
  9. From Sintering to Fracture: A Short History of Holes, keynote address associated with Honorary Wilkinson Symposium, part of Plasticity 2015, Montego Bay, January 2015
  10. Falling Walls Circle 2014, Invitation-only panel on current issues in science and society, Berlin, November 2014
  11. Damage in FCC and HCP Alloys, Symposium to honour André Pineau, Materials Research Society Conference, Boston, December 2013
  12. Falling Walls Circle 2013, Invitation-only panel on current issues in science and society, Berlin, November 2013
  13. Future of Materials Research, workshop in honour of the 100th anniversary of metallurgy and materials science at the University of Toronto, October 2013
  14. Void Linkage in Magnesium using X-ray Computed Tomography, International Conference on Fracture ICF13, Beijing, June 2013
  15. The enhancement of sustainability concepts in an engineering curriculum and its role in the training of a global engineer, Global Engineering Conference, Ottawa, January, 2012
  16. The Impact of Microstructurally Based Materials Modeling on the Design and Manufacturing of Structural Automotive Components, Opening keynote lecture, Symp. on Characterization and Modeling the Performance of Advanced Alloys for the Transportation Industry, MS&T Conference, Columbus, OH, October 2011
  17. Application of X-ray tomography to the study of void growth and coalescence during ductile fracture, International Conference on Advanced Technology in Experimental Mechanics, Kobe, Japan, September 2011
  18. Void Growth and Coalescence Investigated by X-ray Computed Tomography, Conference on Experimental and Applied Mechanics, Uncasville, CT, June 2011
  19. The Use of X-ray Tomography in the Study of Damage and Ductile Fracture, International Conference on Plasticity, Mexico, January 2011
  20. Microstructurally based Models for Shear Localization and Fracture in Automotive Al Alloys, International Conference on Aluminum Alloys (ICAA12), keynote lecture, Yokohama, Japan, September 2010.
  21. The Impact of Materials Technologies on the Development of Fuel Efficient Vehicles, Annual Meeting of the Royal Society of Canada, Ottawa, June, 2010.
  22. Effect of Creep on the Growth of Thermal Scales, International Conference on Plasticity, St. Kitts, January, 2010
  23. Workshop on Advanced Instrumentation in Materials Science, Kingston, June 2009
  24. Role of Texture in Sheet Forming Models, Intl. Conf. on Plasticity, St. Thomas, USA, January, 2009.
  25. Microstructurally based models for sheet forming, Conference of Metallurgists, Winnipeg, August 2008
  26. Formability of Al Alloys, Intl. Conf. on Plasticity, Hawaii, January, 2008
  27. Formability of Al Alloys for Automotive Sheet Applications, Light Metals Technology Conference, Saint-Sauveur, Quebec, September, 2007
  28. Towards a Microstructurally Based Model for Formability of Automotive Sheet, Canadian Materials Science Conference, Hamilton, June, 2007
  29. Light Weight Materials for Vehicle Structures, Workshop on Automotive Materials, Hamilton, June, 2007
  30. Materials Science Applications of Computed X-ray Tomography, Chemical Society of Canada Annual Conference, Winnipeg, May 2007
  31. Effect of Microstructure on the Formability of Al Alloy Sheet, NRC Aluminum Technology Centre, Chicoutimi, September, 2006
  32. Microstructurally Based Models of Sheet Formability in Automotive Al Alloys, David Lloyd session, Intl Conf on Aluminum Alloys (ICAA10), Vancouver, July 2006
  33. The Role of Shear Localization on the Ductility and Formability of Strip-cast AA5754, James Morris Symposium, 2006 TMS Annual Meeting, San Antonio, March, 2006
  34. Materials and Manufacturing Research at McMaster, Bombardier Inc., Toronto, December, 2005
  35. Analysis of Damage in Metal via Synchrotron-based X-ray Tomography, Annual User’s Meeting, Canadian Light Source, Saskatoon, SK, November, 2005
  36. Damage Coalescence and Ductile Fracture, General Motors Corporate R&D Center, Warren, MI, November 2005
  37. The Effect of Stress on Nitride and Oxide Scale Formation in γ-TiAl, Composites at Lake Louise, November, 2005
  38. Multiscale Modeling of Shear Localization During Tensile Deformation of Aluminum Alloys, ECI Conference on Micromechanics and Microstructure Evolution: Modeling, simulation and Experiments, Madrid, September, 2005
  39. The Application of X-ray Tomography to the Study of Damage In Two-Phase Alloys, Euromat2005, Prague, September, 2005
  40. Damage and Fracture in Two Phase Alloys and Metal Matrix Composites, Escuela T. S. de Ingenieros de Caminos, Polytechnic University of Madrid, Madrid, England, May, 2005.
  41. The Role of Strain Ageing and Shear Instability on Ductility and Formability in Aluminum Alloy Sheet, Ecole des Mines de St. Etienne, France, May 2005.
  42. The Role of Strain Ageing and Shear Instability on Ductility and Formability in Aluminum Alloy Sheet, Norwegian University of Science and Technology (NTNU), April, 2005.
  43. Damage and Fracture in Two Phase Alloys and Metal Matrix Composites, Norwegian University of Science and Technology (NTNU), April, 2005.
  44. Damage and Fracture in Two Phase Alloys and Metal Matrix Composites, Cambridge University, England, April, 2005.
  45. The Role of Strain Ageing and Shear Instability on Ductility and Formability in Aluminum Alloy Sheet, Alcan Research Centre, Voreppe, France, March 2005.
  46. Damage and Fracture in Two Phase Alloys and Metal Matrix Composites, Insitut Polytechnique de Grenoble, France, February, 2005.
  47. The effect of damage coalescence on the ductility of two-phase alloys, Plasticity 2005, Kauai, January 2005
  48. Ductility and Formability of Automotive Aluminum Alloys, University of Queensland, Australia, December, 2004
  49. The Role of Strain Ageing and Shear Instability on Ductility and Formability in Aluminum Alloy Sheet, 3rd International Conference on Advanced Materials and Processes, Australia, November, 2004
  50. Development of Nanoporous NiO and CoO Ceramics for Supercapacitor Applications, 2nd International Workshop on Advanced Ceramics, Nagahama Japan, November 2004
  51. Creep Behaviour of SiC-whisker Reinforced Ceramics, 3rd Intl Symposium on the Science and Engineering of Ceramics, Osaka Japan, October 2004
  52. The development of thin strip cast aluminum alloys for lightweight automotive structures, Inaugural Conference of the French Federation of Materials, Limoges, October 2004
  53. Modeling Damage Evolution and Fracture in Metal Matrix Composites, Canada-Japan Workshop on Composite Materials, Yamagata, Japan, September 2004
  54. Modeling Damage Evolution and Ductility in Heterogeneous Alloys, Canadian Materials Science Conference, Ottawa, June 2004
  55. Processing and properties of nickel foams for battery applications, Symp. On Advanced Materials for Energy Conversion, TMS Annual Meeting, Charlotte NC, March 2004
  56. The impact of materials technology on the automobile of the 21st century, CIM Distinguished Lecture, presented to chapters of CIM (Rouyn-Noranda, Ottawa, Red Lake, Flin Flon, Thompson, Yellowknife, Calgary, Fort McMurray), Feb - May 2004
  57. The role of reinforcement morphology on the creep response of ceramic materials, Composites at Lake Louise (CALL 2003), October 2003
  58. Thermomechancial processing of strip cast aluminum alloys for automotive application, Brazil MRS conference, Rio de Janeiro, October, 2003
  59. Processing and Properties of Porous Nickel Structures for Battery Applications, Brazil MRS conference, Rio de Janeiro, October, 2003
  60. The Role of a Grain Boundary Amorphous Phase on the Creep Response of Silicon Nitride Ceramics, American Ceramic Society Annual Conference, St. Louis, May 2002
  61. Modeling of Damage during Deformation of Multi-phase Aluminum Alloys, International Workshop on Crashworthiness of Vehicles, MIT, May 2002
  62. Porous Nickel for Battery Electrodes, International Workshop on Ecomaterials, Tokyo, February 2002
  63. Development of Automotive Sheet for Automotive Applications, International Workshop on Ecomaterials, Tokyo, February 2002
  64. Effect of Shear Banding on the Deformation and Damage of Automotive Al Alloys, International Conference on Plasticity, Aruba, January, 2002
  65. International Conference on Deformation of Ceramics, Seville, Spain, October, 2001
  66. International Workshop on the Effect of Interfaces on the Properties of Ceramics, Nagoya, Japan, March, 2000
  67. Symposium on Innovative Processing and Synthesis of Ceramics, St. Louis, May 2000
  68. 8th International Conference on the Mechanical Behaviour of Materials (ICM8), Victoria, BC, May, 1999
  69. The Role of Grain Boundaries on the Creep Behaviour of Silicon Nitride, Advanced Study Group, Max Planck Institut fur Metallforschung, June, 1999
  70. Damage and Fracture Behaviour of Metal Matrix Composites and Two-Phase Alloys, Materialsprufunganlage, University of Stuttgart, June, 1999
  71. International Workshop on Mechanical Behaviour of Heterogeneous Materials, Autrans, France, December, 1999
  72. Wiederhorn Symposium, American Ceramic Society Conference, Cincinnati, OH, May, 1998
  73. Mullite / Zirconia Composites: Processing and Microstructure, 1998 Annual Meeting of Canadian Ceramic Society, Toronto, Feb. 1998
  74. NATO Advanced Research Workshop on Layered and Composite Materials, Kiev, Ukraine, May 1997
  75. Symposium on Micro and Nano Analysis of Ceramics, European Ceramic Society Conference, Versailles, France, July, 1997
  76. Elected chair of 1996 Gordon Conference on Solid State Studies in Ceramics
  77. Plastic Deformation of Structural Materials at High Temperatures, Schloss Ringberg, Germany, July, 1996
  78. IUTAM Symp. on Deformation and Fracture in Multi-phase Materials, Sevres, France, 1995
  79. CAM ‘94, Mechanical Behaviour of Metal Matrix Composites, Cancun, Mexico, 1994.
  80. Engineering Foundation Conference on Plastic Deformation of Ceramics, Snowbird UT, 1994
  81. Engineering Foundation Conference on the Development of High Temperature Structural Materials, Hawaii, 1993.
  82. 95th Annual Meeting of the American Ceramic Society, Symposium on Fracture, Deformation and Reliability of Ceramics, Cincinnati, 1993.
  83. Gordon Conference on Solid State Studies in Ceramics, New Hampshire, 1993.
  84. Intl. Workshop on Tailoring of High Temperature Properties of Silicon Nitride Ceramics, Schloss Ringberg, Germany, 1993.
  85. Pacific Rim Ceramics Conference, Symp. on the Mechanics of Layered Composites, Hawaii, 1993.
  86. Symposium on Creep, Superplasticity, Creep Fracture and Deformation Processes, Pacific Coast Regional Meeting of Amer. Ceram. Soc., 1992
  87. Inaugural Conference, Materials Research Society of Mexico, Mexico City, 1991.
  88. International Conference on Fracture Mechanics of Ceramics, Nagoya, Japan, 1991.
  89. NATO Advanced Research Workshop on Toughening Mechanisms in Quasi-Brittle Materials, Chicago, 1990.
  90. Engineering Foundation Conference on Structural Ceramics-Science and Technology, Palm Coast, FL, 1989.
  91. Canadian Fracture Conference (CFC-19), Constitutive Laws of Plastic Deformation and Fracture, Ottawa, 1989.
  92. International Conference on Superplasticity, Blaine, WA, 1988.
  93. Ashby Symposium, part of ASM World Materials Congress, Chicago, 1988
  94. Topical Conference on High Temperature Materials, Northeast Regional Meeting of the American Ceramic Society, Cape Cod, MA, 1988.
  95. Gordon Research Conference on Physical Metallurgy, 1985.
  96. International Conference on Superplasticity, Grenoble, France, 1985.
  97. International Conference on Sintering, Dubrovnik, Yugoslavia, 1978
  98. International Conference on Sintering, Notre Dame, USA, 1975

Research Publications

Refereed Journal Publications

In Review

  1. Gao, Z., Wilkinson, D.S., Sinclair, C., Kang, J. and Bruhis, M., On the Role of Microstructural Stability of Magnesium Alloy Sheets during Elevated Temperature Deformation, under revision (2012)
  2. Hu, X.H., Zhu, G.Z., Wilkinson, D.S., Jain, M. Wu, P.D. and Mishra, R.K., Finite element and experimental studies of tensile deformations of AA5754 alloys with extra-large grains, in preparation. (2010)
  3. Hussain, K. Wilkinson, D.S. and Embury, J.D. "High Temperature Low Cycle Fatigue of Nickel Base Superalloy: Estimating Fatigue Life from Striation Spacing in the Presence of Beach Marks", in preparation (2010)

Papers Accepted or Published

  1. Nemcko, M.J. and Wilkinson, D.S., On the damage and fracture of commercially pure magnesium using X-ray microtomography, Mater. Sci. Eng. A 676, 146–155 (2016)
  2. Nemcko, M.J., Li, J. and Wilkinson, D.S., Effects of void band orientation and crystallographic anisotropy on void growth and coalescence, J. Mech. Phys. Sol., 95, 270-83 (2016)
  3. Nemcko, M.J., Qiao, H., Wu, P. and Wilkinson, D.S., Effects of Void Fraction on Void Growth and Linkage in Commercially Pure Magnesium, Acta Mater., 113, 68-80 (2016)
  4. Yang, Z., Kang, J. and Wilkinson, D.S, The Effect of Porosity on Fatigue of Die Cast AM60, Metall. Mater. Trans. A, 47, 3464-72 (2016)
  5. Yang, Z., Maurey, A., Kang, J. and Wilkinson, D.S, 2D and 3D characterization of pore defects in die cast AM60, Mater. Charact., 114, 254-62 (2016)
  6. Nemcko, M.J. and Wilkinson, D.S., Impact of microstructure on void growth and linkage in pure magnesium, Inter. J. Fract, 200, 31-47 (2016)
  7. Ray, A.K. and Wilkinson, D.S., A ductile fracture analysis in wrought magnesium alloys using X-ray tomography, Mater. Sci. Engin. A, 658, 33–41 (2016)
  8. Kang, J., Chen, Y., Sigler, D., Carlson, B. and Wilkinson, D.S., Effect of Adhesive on Fatigue Property of Aural2 to AA5754 Dissimilar Aluminum Alloy Resistance Spot Welds, Engin. Failure Anal., 69, 57-65 (2016), doi:10.1016/j.engfailanal.2016.01.009
  9. Yang, Z., Kang, J. and Wilkinson, D.S., Characterization of Pore Defects and Fatigue Cracks in Die Cast AM60 Using Computed X-ray Tomography, Metall. Mater. Trans. B, 46, 1576-85 (2015)
  10. Hu, X.H., Wilkinson, D.S., Jain, M., Wu, P.D. Mishra, R.K., Fuel cap stamping simulation of AA5754 sheets using a microstructure based multi-scale approach , Comp. Mater. Sci., 98, 354-65 (2015)
  11. Hosokawa, A., Wilkinson, D.S., Kang, J. and Maire, E., Onset of void coalescence studied by continuous X-ray computed tomography, Acta Mater., 61, 1021-36 (2013)
  12. Hosokawa, A., Wilkinson, D. S., Kang, J. and Maire, E., Influence of the restored work-hardening rate on ductility studied by X-ray computed tomography, Phil. Mag. Lett., 93, 379-86 (2013)
  13. Hosokawa, A., Wilkinson, D. S., Kang, J. D., Kobayashi, M and Toda, H., Void growth and coalescence in model materials investigated by high-resolution X-ray microtomography, Inter. J.Fract., 181, 51-66 (2013)
  14. Kang, J., Wilkinson, D.S., Mishra, R.K., Yuan, W and Mishra, R.S., Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet, Mater. Sci. Engin., A567, 101-109 (2013) http://dx.doi.org/10.1016/j.msea.2012.08.117
  15. Kang, J., Wilkinson, D.S., Mishra, R.K, Embury J.D., Essadiqi E., Javid A., Microstructural aspects of damage and fracture in AZ31 sheet materials, J. Mater. Engin. Perf., 22, 1386-95 (2013) )
  16. Cuthbert, R., Pan, F., Nieminen, K., Friedrich, K., Wilkinson, D. and Cotton, J.S., A Solar PV-Thermal Energy Design Optimization Study of a Building Footprint Limited Net-Zero Energy Facility, ASHRAE Trans. 119, 188-202 (2013)
  17. Payen, G. R., Klocker, H., Lens, A., Wilkinson, D.S. and Embury, J.D., Design of an in situ mechanical test for spot-welded joints, Engin. Fract. Mech., 96, 528-38 (2012)
  18. Davidkov, A., Jain, M.K., Petrov, R.H., Wilkinson, D.S. and Mishra, R.S., Strain localization and damage development in bending of Al-Mg alloy sheets, Mater. Sci. Engin., A550, 395-407 (2012)
  19. Kang, J., Mishra, R.K., Wilkinson, D.S., Hopperstand, O.S., Effect of Mg content on Portevin - le Chatelier band strain in Al-Mg sheet alloys, Phil. Mag. Lett., accepted (07/2012)
  20. Hosokawa, A., Wilkinson, D.S., Kang, J. and Maire, E., Effect of triaxiality on void growth and coalescence in model materials investigated X-ray tomography, Acta Mater., accepted (01/2012)
  21. Zhu, G.Z., Hu, X.H., Wilkinson D.S. and Mishra R.K., Deformation inhomogeneity in AA5754 sheets, Mater. Sci. Engin. A528, 4187-98 (2011)
  22. Hu, X.H., Wilkinson, D.S., Jain, M., Wu, P.D., Mishra, R.K., The impact of particle distributions and grain-level inhomogeneities on post-necking deformation and fracture in AA5754 aluminum sheet alloys, Mater. Sci. Engin. A, A528, 2002-11(2011)
  23. Hu, X., Wilkinson, D. S., Jain, M., and Mishra, R. K., A parametric finite element study and an analytical mode of particle distributions on post-necking deformation and failure mode in AA5754 aluminum alloy sheets”, Intl. J. Fract.,162,167-83 (2010)
  24. Hu, X.H., Cingara, G.A., Wilkinson, D.S., Jain, M., Wu, P. and Mishra R., Studies of Texture Gradients in the Localized Necking Band of AA5754 by EBSD and FEM, CMC - Computers, Materials and Continua, 14, 99-123 (2010)
  25. Hu, X.H., Wilkinson, D.S., Jain, M., Wu, P.D. Mishra, R.K., Study, A macro-micro multi-level modeling scheme to study the effect of particle distribution on wrap-bendability of AA5754 sheet alloys, Journal of Materials Processing Technology, 210, 1232-42 (2010).
  26. Kong, J., Wilkinson, D.S. and Provatas, N., “Anelastic Behaviour Modeling of SiC Whisker Reinforced Al2O3”, J. Am. Ceram. Soc., 93, 857-64 (2010)
  27. Dosbaeva, G.K., Veldhuis, S.C., Yamamoto,K., Wilkinson, D.S., Beake, B.D., Jenkins, N., Elfizy, A. and Fox-Rabinovich, G.S., “Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature”, Intl. J. Hard Met. Refract. Mater., 28, 133-141(2010)
  28. Avramovic-Cingara, G., Ososkov,Y., Jain, M. and Wilkinson, D.S., “Effect of Martensite Distribution on Damage Behaviour in DP600 Dual Phase Steel”, Metall. Mater. Trans. A, 516, 7-16 (2009)
  29. Hu, X., Wilkinson, D.S., Jain, M. and Mishra, R. K., 2009, “The influence of particle shape, volume fraction and distribution on post-necking deformation and fracture in uniaxial tension of AA5754 sheet materials”, International Journal of Solids and Structures, 46, 2650 - 58 (2009)
  30. Avramovic-Cingara, G., Saleh, Ch.A.R., Jain, M.K. and Wilkinson, D.S., “Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing”, Metall. Trans., 40A, 3117-3127 (2009)
  31. Hussain, K., Wilkinson, D.S. and Embury, J.D., “Effect of Surface Finish on High Temperature Fatigue of a Nickel Base Superalloy”, Int. J. Fatigue, 31, 743-50 (2009)
  32. Weck, A., Wilkinson, D.S., Maire, E. and Toda, H., “Visualization by x-ray tomography of void growth and coalescence leading to fracture in model materials” Acta Mater., 56, 1774-1784 (2008)
  33. Kang, J., Wilkinson, D.S., Bruhis, M., Jain, M., Wu, P., Embury, J.D. and Mishra, R.K., “Shear Localization and Damage in Automotive Aluminum Alloy AA5754 Sheets”, J. Mater. Engin. Perf., 17, 3950401 (2008)
  34. Kang, J., Hu, X., Wright, S.I., Wu, P.D., Jain, M., Wilkinson, D.S. and Mishra, R.K., “On the Calculation of Volume Fraction of Texture Components in AA5754 Sheet Materials”, Metall. Mater. Trans., 39A, 2007-13 (2008)
  35. Hu, X., Jain, M., Wilkinson, D.S. and Mishra, R.K., “Microstructure-based Finite Element Analysis of Strain Localization Behavior in AA5754 Aluminum Sheet”. Acta Mater., 56, 3187-3201 (2008)
  36. Weck, A and Wilkinson, D.S., “Experimental investigation of void coalescence in metallic sheets containing laser drilled holes”, Acta Mater., 56, 2919-2928 (2008)
  37. Kobayashi, M., Toda, H., Kawai, Y., Ohgaki, T., Uesugi, K., Wilkinson, D.S., Kobayashi, Y., Aoki, Y., Nakazawa, M., “High-density three-dimensional mapping of internal strain by tracking microstructural features”, Acta Mater., 56, 2167-81 (2008)
  38. Hu, X., Wilkinson, D.S., Jain, M. and Mishra, R.K., “Modeling strain localization using a plane stress two-particle model and the influence of grain level matrix inhomogeneity”, J. Engin. Mater. Techn., 130, 021002-1 - 10 (2008)
  39. Weck, A., Wilkinson, D.S. and Maire, E., “Observation of void nucleation, growth and coalescence in a model metal matrix composite using x-ray tomography”, Mater. Sci. Engin, Mater. Sci. Engin. A488, 435-45 (2008)
  40. Kang, J., Wilkinson, D.S., Wu, P.D., Bruhis, M., Jain, M., Embury, J.D. and Mishra, R.K., “Constitutive behaviour of AA5754 sheet materials at large strains”, J. Engin. Mater. Techn., 130, 031004 - 1-5 (2008)
  41. Halim, H., Wilkinson, D. S., and Niewczas, M., “ The Portevin-Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy”, Acta Materialia 55, 4151-4160 (2007)
  42. Weck, A., Crawford, T.H.R., Wilkinson, D.S., Haugen, H.K. and Preston , J.S., “Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses”, Appl. Phys. A 86, 56-61 (2007)
  43. Hu, X., Wilkinson, D.S., Jain, M. and Mishra, R., “Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles”, Mod. Sim. Mater. Sci. Engin., 15, 893-909 (2007)
  44. Weck, A., Crawford, T.H.R., Wilkinson, D.S., Haugen, H.K. and Preston, J.S., “Ripple formation during deep hole drilling in copper with ultrashort laser pulses”, Appl. Phys. A, 89, 1001-1003 (2007)
  45. Weck, A., Segurado, J., Llorca, J., Wilkinson, D.S. and Bohm, H., “Numerical simulations of void coalescence in model materials using a nonlocal ductile damage approximation”, Int. J. Fract., 148, 205-19 (2007)
  46. Duan, X., Jain, M., Metzger, D.R. and Wilkinson, D.S., “A Unified Finite Element Approach for the Study of Postyielding Deformation Behavior of Formable Sheet Materials”, J. Press. Vess. Techn., 129, 689-97 (2007)
  47. Ososkov, Y., Wilkinson, D.S., Jain, and M. Simpson, T., “In-situ measurement of local strain partitioning in a commercial dual-phase steel” Intl. J. Mater. Res., 98, 664-73 (2007)
  48. Herdawandi., H., Wilkinson. D.S. and Niewczas, M., “The Portevin-Le Chatelier (PLC) Effect and Shear Band Formation in an AA5754 Alloy”, Acta Mater., 55, 4151-60 (2007)
  49. Kang, J., Ososkov, Y., Embury, J.D. and Wilkinson, D.S., “Digital Image Correlation Studies for Microscopic Strain Distribution and Damage in Dual Phase Steels” Scripta Mater., 56, 999-1002 (2007)
  50. Kang, J., Wilkinson, D.S., Malakov, D., Halim, H., Jain, M., Embury, J.D., “The Effect of Processing Route on the Characterization of Constituent Particles and Their Spatial Distribution in AA5754 Alloy Sheet Materials”, Mater Sci. Engin. A, A456, 85-92 (2007)
  51. Duan, X., Weck, A., Wilkinson, D.S. and Metzger, D., “Failure Modes of Perforated Material under Finite Deformation”, J Press. Vessel Technol.,129, 689-97 (2007)
  52. Weck, A., Crawford, T.H.R., Boroweic, A., Wilkinson, D.S., Preston , J.S., “Femtosecond laser-based fabrication of a new model material to study fracture”, Appl. Phys. A, 86, 55-61 (2007).
  53. Kobayashi, M., Toda, H., Kawai, Y., Kobayashi, T., Uesugi, K., Wilkinson D.S., Maire, E. and Aoki, Y., “Measurement of 3-D strain distribution by means of high-resolution x-ray CT image and tracking of microstructural features”, J. Japan Inst. Metals, 71, 181-86 (2007) - in Japanese
  54. Limarga, A. and Wilkinson, D.S., “Modeling of the interaction between creep deformation and the scale growth process”, Acta Mater., 55, 189-201 (2007)
  55. Limarga, A. and Wilkinson, D.S., “Creep-driven nitride scale growth process of gamma-TiAl”, Acta Mater., 55, 251-60 (2007)
  56. Quan, G., Wilkinson, D.S. and Conlon, K.” Investigation of Whisker Orientation in SiC Whisker-reinforced Alumina Composites Using Neutron Diffraction”, J. Eur. Ceram. Soc., 27, 389-96 (2007)
  57. Duan, X., Jain, M. and Wilkinson, “Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagrams for sheet material” Metall. Mater Trans. A, 37, 3489-3501 (2006)
  58. Metzger, D., Duan, X., Jain, M., Wilkinson, D.S., Mishra, R., Kim, S. and Sachdev, A.K., “The influence of particle distribution and volume fraction on the mechanical properties of aluminum alloys”, Mech. Mater, 38, 1026-38 (2006)
  59. Weck, A., Wilkinson, D.S., Toda, H. and Maire, E., “2D and 3D visualization of ductile fracture”, Adv. Engin. Mater., 8, 469-72 (2006)
  60. Limarga, A. and Wilkinson, D.S., “A model for the effect of creep deformation and intrinsic growth stress on oxide / nitride scale growth rates with application to the nitridation of γ-TiAl”, Mater. Sci. Engin., A415, 94-103 (2006)
  61. Kang, J., Wilkinson, D.S., Jain, M., Embury, J.D., Beaudoin, A., Kim, S., Mishra, R. and Sachdev, A.K., “On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754”, ” Acta Mater., 54, 209-18 (2006)
  62. Fox-Rabinovich, G.S, Wilkinson, D.S., Veldhuis, S.C., Dosbaeva, J.K. and Weatherly, G.C. “Oxidation resistant Ti-Al-Cr Alloy for protective coating applications”, Intermetallics, 14, 189-97 (2006)
  63. Kang, J., Wilkinson, D.S., Embury, J.D. and Jain, M., “Local Strain Measurement in a Strip-cast Aluminum Alloy”, SAE Trans.: J.Mater. Manufact., 114 (2005), 156-165
  64. Kang, S.-K. Min, B.-K., Kim, H.-W., Wilkinson, D.S. and Kang, J., “Effect of asymmetrical rolling on the texture and mechanical properties of AA6611 aluminum sheet”, Mater. Trans., 36A, 3141-49 (2005)
  65. Quan, G., Conlon, K. and Wilkinson, D.S., “The origin of anelastic strain recovery in SiC whisker-reinforced alumina composites”, J. Amer. Ceram. Soc., 88, 3104-09 (2005)
  66. Kang, J., Wilkinson. D.S., Embury, J.D., Jain, M. and Beaudoin, A.J., “ Effect of Type-B Portevin-Le Chatelier Bands on the Onset of Necking in Uniaxial Tension of Strip Cast AA5754 Sheets”, Script Mater., 53, 499-503 (2005)
  67. Gammage, J., Wilkinson, D.S., Embury, J.D. and Maire, E., “Damage Studies in Heterogeneous Aluminum Alloys Using X-ray Tomography”, Phil. Mag., 85, 3191-3206 (2005)
  68. Kang, J., Jain, M., Wilkinson, D.S. and Embury, J.D., “Microscopic strain mapping using SEM topography Image correlation at large strain”, J. Strain Anal. Engin. Design, 40, 559-70 (2005).
  69. Chani, V., Yang, Q., Wilkinson, D.S. and Weatherly, G.C., Effect of Substrate Pre-Coating on Adhesion of Sintered Nickel Plaques for Electrode Application in Rechargeable Batteries, J. Power Sources, 142, 370-81 (2005)
  70. McNally, B., Zhitomirsky, I. and Wilkinson, D.S., “Cathodic electrodeposition of cobalt oxide films using polyelectrolytes”, Mater. Chem. Phys., 91, 391-98 (2005)
  71. Duan, X., Jain, M., Metzger, D., Kang, J., Wilkinson, D.S. and Embury, J.D., “Prediction of shear localization during large deformation of a continuous cast Al-Mg sheet”, Mater. Sci. Engin., 394, 192-203 (2005)
  72. Azari, H., Girard, S. X., Wilkinson, D. S. and Lloyd, D. J., Effect of thermomechanical processing on the evolution or rolling and recrystallization textures in twin-belt cast AA5754 aluminum alloy, Mater. Trans., 35A, 1839-51 (2004)
  73. Paserin, V., Marcuson, S., Shu, J. and Wilkinson, D.S., “CVD technique for INCO nickel foam production”, Adv. Engin. Mater., 6, 454-59 (2004)
  74. Gammage, J., Wilkinson, D.S., Brechet, Y. and Embury, J.D., “A model for damage coalescence in heterogeneous multi-phase materials”, Acta Mater., 52, 5255-63 (2004)
  75. Limarga, A., Wilkinson, D. S. and Weatherly, G. C., “Modeling of oxidation-induced growth stresses”, Scripta Mater., 50, 1475-79 (2004)
  76. Sarkar, J., Wilkinson, D. S. and Embury, J. D., “Tensile properties and bendability of T4 treated AA611 aluminum alloys”, Mater. Sci. Engin., A369, 258-266 (2004)
  77. Girard, S. X., Azari, H. and Wilkinson, D. S., “Effect of thermomechanical processing on grain structure development in a twin-belt cast automotive aluminum alloy”, Mater. Trans., 35A, 949-52 (2004)
  78. Fox-Rabinovich, G., Weatherly, G. C., Wilkinson, D. S., Kovalev, A. I. and Wainstein, D. L., “The role of chromium in protective alumina scale formations during oxidation of ternary TiAlCr alloys in air”, Intermetallics, 12, 165-180 (2004)
  79. Olurin, J., Wilkinson, D. S., Weatherly, G. C. and Paserin, V., “Strength and ductility of as-plated and sintered CVD nickel foams”, Composite Science and Technology, 63, 2317-29 (2003)
  80. Braccini, M. and Wilkinson, D. S., “A self-consistent approach to modeling strain gradient plasticity”, Scripta Mater., 49, 53-57(2003)
  81. Zaitsev, A., Wilkinson, D. S., Weatherly, G. C., Stephenson, T., “The preparation of highly porous structures from filamentary nickel powders”, J. Power Sources, 123, 253-260 (2003)
  82. Wilkinson, D. S., Pompe, W. and Oeschner, M., Modeling the Mechanical Behaviour of Heterogeneous Multi-Phase Materials, Prog. Mater. Sci., 46, 379-405 (2001)
  83. Yarashenko and Wilkinson, D. S., Sintering and Microstructure Modification of Mullite/Zirconia Composites Derived from Silica-Coated Alumina Powders. J. Amer. Ceram. Soc., 84, 850-58 (2001)
  84. Jin, Q., Wilkinson, D.S., Weatherly, G.C., Luecke, W.E. and Wiederhorn, S.M., Thickness Alteration of Grain-Boundary Amorphous Films During Creep of a Multi-phase Silicon Nitride Ceramic, J. Amer. Ceram. Soc., 84, 1296-1300 (2001)
  85. Sarkar, J., Kutty, T. R. G., Wilkinson, D. S., Embury, J. D. and Lloyd, J. D., Tensile and Bending Properties of AA5754 Aluminum Alloys, Mater. Sci. Engin, A316, 52-59 (2001)
  86. Conlon, K.T. and Wilkinson, D.S., Effect of Particle Distribution on Deformation and Damage of Two Phase Alloys, Mater. Sci. Engin., A317, 108-14 (2001)
  87. Conlon, K.T., Maire, E., Wilkinson, D.S. and Henein, H., Processing and Characterization of Al-Cu Alloys Produced from Rapidly Solidified Powders, Metall. Mater. Trans., A, 31, 249 - 60 (2000)
  88. Dryden, J. R. and Wilkinson, D. S., A Model for the Mechanical Behaviour of Highly Concentrated Composites, Scripta Mater., 42, 313-18 (2000)
  89. Yarashenko and Wilkinson, D. S., Phase Evolution during Sintering of Mullite/Zirconia Using Silica Coated Alumina Powders, J. Mater. Res., 15, 1358-66 (2000)
  90. Wilkinson, D. S., Maire, E. and Fougères, R., A Model for Damage in a Clustered Particulate Composite, Mater. Sci. Engin. A, 262, 264-70 (1999)
  91. Tian, C., Irons, G.A. and Wilkinson, D.S., Settling of Multi-sized Clusters of Alumina Particles in Liquid Aluminum, Metall. Mater. Trans. B, 30, 241-7 (1999)
  92. Estevez, R., Maire, E., Francoisi, P. and Wilkinson, D. S., Self-Consistent Modeling of the Elasto-Plastic Behaviour Coupled with Damage in Particulate Reinforced Materials: Comparisons Between a 3-D and a 1-D Approach, Eur. J. Mech., A18, 785-804 (1999)
  93. Jin, Q., Wilkinson, D. S. and Weatherly, G. C., High Resolution Electron Microscopy Investigation of Viscous Flow Creep in a High Purity Silicon Nitride, J. Amer. Ceram. Soc., 82, 1492-96 (1999)
  94. Jin, Q, Wilkinson, D. S. and Weatherly, G.C., A Model for Viscous Flow Creep in Ceramics Containing Secondary Crystalline Phases, Scripta Mater., 41, 1169-75 (1999)
  95. Jin, Q., Wilkinson, D.S. and Weatherly, G.C., The Contribution of Viscous Flow to Creep Deformation of Silicon Nitride, Mater. Sci. Engin., A271, 257-65 (1999)
  96. Wilkinson, D.S. and Pompe, W., Creep and Anelastic Recovery of Whisker- and Platelet-Reinforced Ceramics, Acta Metall. Mater., 46, 1357-69 (1998)
  97. Jin, Q., Wilkinson, D.S. and Weatherly, G.C., Determination of Grain Boundary Film Thickness by the Fresnel Fringe Imaging Technique, J. Eur. Ceram. Soc., 18, 2281-86 (1998)
  98. Tian, C., Irons, G.A. and Wilkinson, D.S., Monte Carlo Simulation of Clustering of Alumina Particles in Turbulent Liquid Aluminum, Metall. Mater. Trans. B, 29, 785-91 (1998)
  99. Wilkinson, D.S., Creep Mechanisms in Multi-phase Ceramic Materials, Feature Article, J. Amer. Ceram. Soc., 81, 275-99 (1998)
  100. Maire, E., Wilkinson, D.S., Embury, J.D. and Henein, H., Ductilization of a Powder Metallurgy Al-17 wt.% Cu Alloy by Means of Channel-Die Compression and Extrusion, Metall. Mater. Trans., 29A, 2613-20 (1998)
  101. Manomaisupat, D, Wilkinson, D. S. and Petric, A., Combustion Synthesis and Mechanical Properties of Molybdenum Disilicide Composites Reinforced with SiC Particulate, J. Mater. Sci., 33, 2319-30 (1998)
  102. Wilkinson, D.S., Maire, E. and Embury, J.D., The Role of Heterogeneity on the Flow and Fracture of Two-Phase Materials, Mater. Sci. And Engin., A233, 145-154 (1997)
  103. Dryden, J. R. and Wilkinson, D. S., Three Dimensional Analysis of the Creep Due to a Viscous Grain Boundary Phase, Acta Metall. Mater., 45, 1259-1273(1997)
  104. Maire, E., Wilkinson, D. S., Embury, J. D. and Fougeres, R., Role of Damage on the Flow and Fracture of Particulate Reinforced Alloys and Metal Matrix Composites, Acta Metall. Mater., 45, 5261-74 (1997)
  105. Ning, X. G., Wilkinson, D. S., Weatherly, G. C. and Ye, H. Q., High-resolution Transmission Electron Microscopy Investigation of a Stacking Fault in -Si3N4, J. Mater. Sci., 32, 1431-36 (1997)
  106. Corbin, S. F. and Wilkinson, D. S., The Tensile Properties of a Particulate Reinforced Al Alloy in the Temperature Range of -196 to 300 C, Can. Metall. Quart., 35, 189-98 (1996)
  107. Corbin, S. F., Wilkinson, D. S. and Embury, J. D., The Bauschinger Effect in a Particulate Reinforced Al Alloy, Mater Sci. and Engin., A207, 1-11 (1996)
  108. Kiser, M. T., Zok, F. W. and Wilkinson, D.S., Plastic Flow and Fracture of a Particulate Metal Matrix Composite, Acta Metall. Mater., 44, 3465-76 (1996).
  109. Vomacka, P. and Wilkinson, D. S., Influence of ZrO2 Addition on Melting Kinetics of a YSiAlO Glass Ceramic, J. Eur. Ceram. Soc., 16, 1245-51 (1996).
  110. Jin, Q. Ning, X.G., Wilkinson, D.S. and Weatherly, G.C., Redistribution of a Grain Boundary Glass Phase During creep of Si3N4 Ceramics, J. Amer. Ceram. Soc., 65, 211-14 (1996)
  111. Jin, Q., Ning, X.G. Wilkinson, D.S. and Weatherly, G.C., Compositional Dependence of Creep Behaviour in Silicon Nitride Ceramics, J. Can. Ceram. Soc., 65, 211-14 (1996)
  112. Sabljic, D.B. and Wilkinson, D.S., Fabrication of Ni-NiO Composites by Tape Casting, Indust. Heat., 85 - 87 [Sept.] (1996)
  113. Arita, I. H., Wilkinson, D. S. and Castano, V. M., Synthesis and Processing of Hydroxyapatite Ceramic Tapes Casting with Controlled Porosity, J. Mater. Sci.: Mater. Med., 6, 19-23 (1995)
  114. Ham-Su, R. and Wilkinson, D. S., Strength of Tape Cast and Laminated Ceramics, J. Am. Ceram. Soc., 78, 1580-84 (1995)
  115. Arita, I. H., Wilkinson, D. S., Mondragon, M. A. and Castano, V. M., Chemistry and Sintering Behaviour of Thin Hydroxyapatite Ceramics with Controlled Porosity, Biomaterials,16, 403-8 (1995)
  116. Sabljic, D. B. and Wilkinson, D. S., Influence of a Damage Zone on High Temperature Crack Growth in Brittle Materials, Acta Metall. Mater,43, 3937-45 (1995)
  117. Tuffé, S. and Wilkinson, D. S., MoSi2 Based Sandwich Composite Made by Tape-Casting, J. Amer. Ceram. Soc.,78, 2967-72 (1995)
  118. Corbin, S. F. and Wilkinson, D. S., The Influence of Particle Distribution on the Mechanical Response of a PMMC, Acta Metall. Mater., 42, 1311-1318 (1994)
  119. Corbin, S. F. and Wilkinson, D. S., Low Strain Plasticity in a Particulate Metal Matrix Composite, Acta Metall. Mater., 42, 1319-1327 (1994)
  120. Corbin, S. F. and Wilkinson, D. S., Influence of Matrix Strength on the Mechanical Response of a Particulate Reinforced Al Alloy, Acta Metall. Mater., 42, 1329-1335 (1994)
  121. Plucknett, K. P., Cacères, C. H. and Wilkinson, D. S., Tape Casting of Fine Al2O3/ZrO2 Powders for Composite Fabrication, J. Am. Ceram. Soc., 77,2137-2144 (1994)
  122. Plucknett, K. P., Cacères , C. H., Hughes, C. H. and Wilkinson, D. S., Processing of Tape Cast Laminates Prepared from Fine Al2O3/ZrO2 Powders, J. Am. Ceram. Soc., 77,2145-2153 (1994)
  123. Chidiac, S. E., Mirza, F. A. and Wilkinson, D. S., A Simplified Welding Arc Model by the Finite Element Method, Computers and Structures, 53, 1235-1241(1994)
  124. Plucknett, K. P. and Wilkinson, D. S., Microstructural Characterization of a Microwave Sintered Silicon Nitride Based Ceramic, J. Mater. Res.,10, 1387-96 (1994)
  125. Kellet, B. J. and Wilkinson, D. S., Processing and Properties of Alumina-Graphite Platelet Composites, J. Amer. Ceram. Soc.,78,1198-1200 (1994)
  126. Chadwick, M. M. and Wilkinson, D. S., Microstructure in Crept and Annealed Silicon Nitride, J. Amer. Ceram. Soc., 76, 376-84 (1993).
  127. Chadwick, M. M., Jupp, R. and Wilkinson, D. S., Creep Behaviour of a Sintered Silicon Nitride, J. Amer. Ceram. Soc., 76, 385-96 (1993).
  128. Chadwick, M. M., Wilkinson, D. S. and Dryden, J. R., Creep Due to a Non-Newtonian Viscous Phase, J. Amer. Ceram. Soc., 75, 2327-34 (1992).
  129. Chidiac, S. E., Wilkinson, D. S. and Mirza, F. A., Finite Element Modeling of Transient Heat Transfer and Microstructure in Welds II: Modeling of Grain Growth in Austenitic Stainless Steels, Metall. Trans. 23B, 841-845(1992).
  130. Arita, I., Wilkinson, D. S. and Purdy, G. R., Crystallization of Yttria-Alumina-Silica Glasses, J. Amer. Ceram. Soc., 75, 3315-20 (1992).
  131. Wilkinson, D.S. and Chadwick, M.M., Creep Mechanisms in Glass-Containing Ceramics, J. Phys. III, 1, 1131-39 (1991).
  132. Robertson, A.G., Wilkinson, D.S. and Cacères, C.H., Creep and Creep Fracture in Hot-Pressed Alumina, J. Amer. Ceram. Soc., 74, 915-921 (1991).
  133. Wilkinson, D.S., Cacères, C.H. and Robertson, A.G., Damage and Fracture Mechanisms During High Temperature Creep in Hot-Pressed Alumina, J. Amer. Ceram. Soc., 74, 922-933 (1991).
  134. Wu, X., Campenni, V., Cacères, C.H. and Wilkinson, D.S., The Effect of Cyclic Deformation on Strain Enhanced Grain Growth During Superplastic Flow, Mater. Sci. Techn., 5, 999-1004 (1989).
  135. Dryden, J.R., Kucerovsky, D., Wilkinson, D.S. and Watt, D.F., Creep Deformation Due to a Viscous Grain Boundary Phase, Acta Metall., 37, 2007-2015 (1989).
  136. Wilkinson, D.S., A Pressure Sintering Model for Densification of Polar Firn and Glacier Ice, J. Glaciol., 34, 40-45 (1988).
  137. Wilkinson, D.S. and Biner, S.B., Creep Crack Growth Simulation Under Transient Stress Fields, Metall. Trans., 19A, 829-835 (1988).
  138. Wilkinson, D.S., The Effect of Non-Uniform Void Distribution on Void Growth During Creep, Acta Metall., 36, 2055-64 (1988).
  139. Wilkinson, D.S., The Effect of Devitrification on Creep Deformation in Glass-Containing Ceramics, J. Amer. Ceram. Soc., 71, 562-565 (1988).
  140. Wilkinson, D.S., The Effect of Time-Dependent Void Density on Grain Boundary Fracture: I - Continuous Void Coalescence, Acta Metall., 35, 1251-1259 (1987).
  141. Wilkinson, D.S., The Effect of Time-Dependent Void Density on Grain Boundary Fracture: II - Continuous Void Nucleation, Acta Metall., 35, 2791-2799 (1987).
  142. Cacères, C.H. and Wilkinson, D.S., Superplastic Behaviour of a Zn-22% Al-0.5% Cu Alloy, Metall. Trans., 17A, 1873-1875 (1986).
  143. Wilkinson, D.S. and Cacères, C.H., Mechanism of Plastic Void Growth During Superplastic Flow, Mater. Sci. Techn., 2, 1086-1092 (1986).
  144. Arzt, E. and Wilkinson, D.S., Threshold Stresses for Dislocation Climb Over Hard Particles: The Effect of an Attractive Interaction, Acta Metall., 34, 1893-1898 (1986).
  145. Biner, S.B., Wilkinson, D.S. and Watt, D., On the Stress and Strain Fields Ahead of a Stationary Crack in a Creeping Solid, Engg. Fract. Mech., 21, 315-328 (1985).
  146. Cacères, C.H. and Wilkinson, D.S., Large Strain Deformation of a Superplastic Copper Alloy - I. Deformation, Acta Metall., 32, 415-422 (1984).
  147. Cacères, C.H. and Wilkinson, D.S., Large Strain Deformation of a Superplastic Copper Alloy - II. Cavitation and Fracture, Acta Metall. 32, 423-434 (1984).
  148. Cacéres, C.H. and Wilkinson, D.S., An Evaluation of Available Data for Strain-Enhanced Grain Growth During Superplastic Flow, J. Mater. Sci. Lett., 3, 395-399 (1984).
  149. Wilkinson, D.S. and Cacères, C.H., On the Mechanism of Strain-Enhanced Grain Growth During Superplastic Flow, Acta Metall., 32, 1335-1345 (1984).
  150. Swinkels, F.B., Wilkinson, D.S., Arzt, E. and Ashby, M.F., Mechanisms of Hot-Isostatic Pressing, Acta Metall., 31, 1829-1840 (1983).
  151. Cacères, C.H. and Wilkinson, D.S., Grain Growth at Low Strain Rates in a Superplastic Cu Alloy, Scripta Metall., 16, 1363-1365 (1982).
  152. Wilkinson, D.S. and Vitek, V., Overview 24 - The Propagation of Cracks by Cavitation: A General Theory, Acta. Metall., 30, 1723-1733 (1982).
  153. Wilkinson, D.S., A Model for Creep Cracking by Diffusion-Controlled Void Growth, Mat. Sci. Eng., 49, 31-39 (1981).
  154. Wilkinson, D.S., Thyagarajan, N., Abiko, K.A., Bodnar, R.L. and Pope, D.P., Compositional Effects on the Creep Ductility of a Low Alloy Steel, Met. Trans., 11A 1827-1836 (1981).
  155. Wilkinson, D.S. and Vitek, V., Stress Analysis of a Microvoid Ahead of a Crack, Res. Mech. 1, 101-108 (1980).
  156. Wilkinson, D.S., Routbort, J.L. and Voglewede, J.C., Final Stage Densification of Mixed Oxide Fuels, J. Nucl. Mater. 80, 348-355 (1979).
  157. Wilkinson, D.S. and Ashby, M.F., Mechanism Mapping of Sintering Under an Applied Pressure, Sci. Sint. 10, 67 (1978).
  158. Wilkinson, D.S. and Ashby, M.F., Pressure Sintering by Power Law Creep, Acta. Metall., 23, 1277-1285 (1975).
  159. Wilkinson, D.S. and Weatherly, G.C., Contribution of Grain Boundary Diffusion and Capillarity Forces to the Diffusional Creep of Wires and Fibres, Met. Trans. 6A, 265-270 (1975).
  160. Eadie, R.L. Wilkinson, D.S. and Weatherly, G.C., Reply to Discussion on "The Rate of Shrinkage during the Initial Stage of Sintering", by J.H. Rosolowski, Scripta Metall. 9, 599-601 (1975).
  161. Eadie, R.L., Wilkinson, D.S. and Weatherly, G.C., The Rate of Shrinkage During the Initial Stage of Sintering, Acta Metall. 22, 1186-1195 (1974).

Conference Papers and Unrefereed Publications

  1. Wilkinson, D.S., Creep and creep rupture of oxide ceramics, in: Saleem Hashmi (Editor-in-Chief). Reference Module in Materials Science and Materials Engineering, 13, 1-3 Oxford: Elsevier (2017)
  2. Kang, J., Chen, Y., Sigler, D., Carlson, B. and Wilkinson, D.S., Fatigue Behavior of Dissimilar Aluminum Alloy Spot Welds, 1st Intl. Conf. on Structural Integrity, Procedia Eng., in press (2015)
  3. Nemcko, M., Mas, P., Bruhis, M. and Wilkinson, D.S., Characterization of Damage in Magnesium using Digital Image Correlation and Electron Backscattered Diffraction Patterning, Magnesium Technology 2014.
  4. Nemcko, M., Wilkinson, D.S., In situ Damage Examination during Room Temperature Deformation of Commercially Pure Magnesium Using X-ray Micro-computed Tomography, Magnesium Technology 2013.
  5. Kang, J., Mishra, R.K. and Wilkinson, D.S., Effect of Plastic Anisotropy on Shear Localization and Fracture in Automotive Sheets, ICF13, June 2013, Beijing
  6. Nemcko, M.J. and Wilkinson, D.S., Investigation of Void Linkage in Magnesium Using SEM and Micro Computed X-ray Tomography, ICF13, June 2013, Beijing
  7. Nemcko, M.J., Wilkinson, D.S. and Kang, J., “The 2-Dimensional Analysis of Void Growth and Coalescence during Deformation in Magnesium”, Magnesium 2012: 9th Intl. Conf. on Mg and its Alloys, Vancouver, 2012.
  8. Caldwell, T., Friedrich, K., Gregus, B., Verschuere, R., Anderson, J., Murenbeeld, A., Arfaei, K., Boroumand, M., Wilkinson, D., Cotton, J.S., 2012, “Targeting a Net-Zero Energy Student Center: Part 1 - Thermal and Electrical Load Minimization", 2012, ASHRAE Annual Conference, June 23-28, San Antonio, TX.
  9. Friedrich, K., Caldwell, T., Gregus, B., Verschuere, R., Anderson, J., Murenbeeld, A., Arfaei, K., Boroumand, M., Wilkinson, D., Cotton, J.S., 2012, Targeting a Net-Zero Energy Student Center: Part 2 - Systems to Meet Building Loads, 2012, ASHRAE Annual Conference, June 23-28, San Antonio, TX.
  10. Hu, X., Kang, J., Wilkinson, D.S., Jain, M., Wu, P., Mishra, R.K., Sachdev, A.K. and Kim, S, “Formability of an Automotive Al Alloy AA5754 CC”, SAE Transactions, paper 08M-286 (2008)
  11. Hu, X. H., Wilkinson, D.S., Jain, M. and Mishra, R.K., Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles, Materials Science and Technology (MS&T) 2008, Sep. 16-20, 2008, Detroit, Michigan, Fundamentals and Characterization: Characterization & Modeling of the Mechanical Performance of Advanced Alloys, Building the data gap, Modeling the Mechanical Properties of Advanced Alloys. 69-83.
  12. Wilkinson, D.S., Jain, M., Hu, X.H., Cingara, G.A., Mishra, R.K., Microstructurally based models for shear localization and formability, Proceedings of the 11th International Conference on Aluminium Alloys, 22-26 Sept. 2008, Aachen, Germany. Aluminium Alloys, Their Physical and Mechanical Properties, Volume 1-2, Edited by J. Hirsch, B. Scrotzki and G. Gottstein. pp. 1809-1815.
  13. Cingara, G., Ososkov, Y., Wilkinson, D.S. and Jain, M., “Influence of Martensite Morphology on Damage Mechanism of Dual Phase Steels”, Proc. 2007 MST Conference, Paper MST-0436-2007
  14. Kobayashi, M., Toda, H., Ohgaki, T., Uesugi, K., Wilkinson, D.S., Kobayashi, T., Kawai, Y. and Aoki, Y., “Measurement of 3-D strain distribution based on tracking of microstructural features in high-resolution SR-CT image”, Proc. Intl. Conf. on Advanced Technology in Experimental Mechanics (Fukuoka, Japan, 2007).
  15. Toda, H., Kobayashi, M., Uesugi, K., Wilkinson, D.S. and Kobayashi, T., “3-D strain mapping inside materials by microstructural tracking in tomographic volumes”, Proc. 3rd Intl. Conf. on Computational Methods and Experiments in Material Characterisation (Bologna, Italy, 2007)
  16. Kang, J., Wilkinson, D.S., Jain, M. and Mishra, R., “Three dimensional structure of Portevin - le Chatelier bands and shear bands in strip-cast AA5754 using digital image correlation”, Proc. SAE2007, paper 07M-301
  17. Mach, J.C., Kang, J., Wilkinson, D.S. and Beaudoin, A., “Heterogeneity in Plastic Deformation”, ICAA10 Mater Sci. Forum, 519-521 (2006), 85-92
  18. Kang, J., Wilkinson, D.S., Embury, J.D. and Hussain, K., “Investigation on mechanism of ductile fracture of AA5754 sheet”, ICAA10, Mater Sci. Forum, 519-521 (2006), 985-90
  19. Wilkinson, D.S., Kang, J., Duan, X., Jain M. and Embury, J.D., “Modeling the role of microstructure on shear instability with reference to the formability of automotive aluminum alloys”, ICAA10, Mater Sci. Forum, 519-521 (2006), 183-90
  20. Duan, X., Weck, A., Wilkinson, D.S. and Metzger. D, “Limit analysis for perforated plates with triangular array of holes”, Proc. PVP-06, ASME (2006)
  21. Duan, X., Jain. M, Wilkinson, D.S., “Failure behaviour of notched sheet specimen under plane strain deformation”, Proc. PVP-06, ASME (2006)
  22. McNally, B., Quan, G., Zhitomirsky, I. and Wilkinson, D.S., „Novel nickel oxides for electrochemical supercapacitors“, Proc. Sintering 2005 (2005)
  23. Duan, X., Weck, A., Wilkinson, D.S. and Metzger, D.R., “Plastic Limit Analysis of Perforated Material Under Large Deformation”, Proc. PVP2005, ASME (2005)
  24. Winkler, S. L., Bardelcik, A., Worswick, M. J., Ososkov, Y., Wilkinson, D. S. and Jain, M., “Damage and Formability of AKDQ and High Strength DP600 Steel Tubes”, Proc. SAE2005
  25. Duan, X., Jain, M., Bruhis, M. and Wilkinson, D.S., “Experimental and Numerical study of intense shear banding for Al alloy under uniaxial tension”, Sheet Metal Forming 2005, Adv. Mater. Res., 6-8 (2005), 733-44
  26. Limarga, A.M., Wilkinson, D.S. and Weatherly, G.C., “Effects of applied stress on the oxidation kinetics of γ-TiAl”, Proc. Conference of Metallurgists, (TMS-CIM, 2004)
  27. Duan, X., Jain, M., Metzger, D., Kang, J., Wilkinson, D.S., Embury, J.D., Kim, S., Mishra, R. and Sachdev, A.K., “A Novel Approach for the Prediction of Shear Localisation in Sheet Forming”. Materials Processing and Design: Modeling, Simulation and Applications. NUMIFORM2004, S. Ghosh, J. M. Castro and J. K. Lee (eds.), (American Institute of Physics, Ohio, USA), 838-843 (2004).
  28. Kang, J., Jain, M., Wilkinson, D.S., Embury, J.D., “Multi-scale characterization of shear localization in continuous cast automotive sheet AA5754”, AIST/TMS Proceedings of Materials Science and Technology 2004,Vol. 2: Modeling and Computer Applications in Metal Casting, Shaping and Forming Processes, (2004)
  29. Kang, J., Jain, M., Wilkinson, D.S., Embury, D.S., Kim, S. and Sachdev, A.K., “Effect of strain path change on forming limits of strip cast automotive aluminum sheets AA5754”, Dislocations, Plasticity and Metal Forming, Proceedings of the Tenth International Symposium on Plasticity and Its Current Applications, Khan, A.S. ed. (NEAT Press), 181-183 (2003)
  30. Paserin, V., Marcuson, S., Shu, J and Wilkinson, D.S., “The chemical vapour deposition technique for Inco nickel foam productions - manufacturing benefits and potential applications”, in Cellular Metals and Metal Foaming Technology, J. Barnhart and N. Fleck, eds. (MIT-Verlag, 2003)
  31. Zaitsev, A.Yu., Wilkinson, D.S. and Weatherly, G.C., The preparation of highly porous structures from filamentary nickel powders”, in Proc. TMS Annual Meeting (2002)
  32. Wilkinson, D. S., “The Influence of Grain Boundaries and Interphase Boundaries on the Creep Response of Silicon Nitride”, Proc. Intl. Conf. On Grain Boundary Engineering in Ceramics, in Ceramic Transactions, 118, 285-292 (2000)
  33. Sarkar, J., Kutty, T.R.G., Wilkinson, D.S., Embury, J.D. and Lloyd, D.J. “Characterization of bendability in automotive aluminum alloy products”, Mater. Sci. Forum, 331-337 (2000), 583
  34. Wilkinson, D.S. and Ham-Su, R., “Effect of Network Formation on the Creep of Platelet-Reinforced Ceramics”, in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee and K.L. Murty, eds. (TMS, 1999), 23-30
  35. Wilkinson, D.S., Conlon, K.T., Embury, J.D. and Maire, E., “The Role of Clustering on the Mechanical Behaviour of Metal Matrix Composites and Two-Phase Alloys”, in Advances in Industrial Materials, Proceedings of an International Symposium, D. S. Wilkinson, W. J. Poole and A. Alpas eds. (The Metallurgical Society of CIM, Montreal, 1998)
  36. Wilkinson, D.S. and Ham-Su, R., Role of Platelet Orientation on the Creep of Silicon Carbide Platelet-Reinforced Alumina, in Proc. Euromat 97, vol. 2, L.A.J.L. Sarton and H.B. Zeedijk editors. Netherland Society for Materials Science, Zwijndrecht, NL, 415-18 (1997)
  37. Maire, E., Wilkinson, D.S., Embury J.D. and Henein, H., Ductility Of An Al-Cu Alloy Produced By The Powder Metallurgy Route, in Proc. Euromat 97, vol. 1, L.A.J.L. Sarton and H.B. Zeedijk editors. Netherland Society for Materials Science, Zwijndrecht, NL, 361-4 (1997)
  38. Flacher, O., Blandin, J.J., Plucknett, K.P., Wilkinson, D.S. and Caceres, C.H., Effects of Porosity on the Superplastic Properties of Submicron Alumina-Zirconia Composites, Mater. Sci. Forum, 243-245, 411-16 (1997)
  39. Wilkinson, D. S. and Maire, E., The Application of Self-Consistent Approaches to Modeling Mechanical Behaviour of Heterogeneous Two Phase Solids, in "Multilayered and Fibre-Reinforced Composites: Problems and Prospects", Y. M. Haddad and S. A. Firstov, eds., Kluwer Academic Publishers (Dordrecht, NL, 1997)
  40. Maire, E., Embury, J. D. and Wilkinson, D. S., “Modeling of Damage in Particulate Metal Matrix Composites”, Proc. CMMC96, in Key Engineering Materials, vol. 127-131. Trans Tech Publications, Zurich, Switzerland, 1167-74 (1997)
  41. Ham-Su, R. and Wilkinson, D. S., “The Role of Platelet Orientation on the Creep Behaviour of Al2O3/SiC Composites”, Proc. CMMC96, in Key Engineering Materials, vol. 127-131. Trans Tech Publications, Zurich, Switzerland, 885-88 (1997)
  42. Ning, X. G., Ham-Su, R. and Wilkinson, D. S., Structural Characterization of SiC Platelet-Reinforced Al2O3 Matrix Composites Before and After Creep Deformation, Mater. Sci. Forum, 207-209, 177-180 (1996)
  43. Ning, X. G., Wilkinson, D. S., Mao, J. F., Li, J. H., Ye, H. Q., Pu, Z. J., and Zou, D. X., High Resolution Transmission Electron Microscope Investigation of Phases, Domains and Interfaces in Ti.505Al.465Cr3/TiB2 Composites, Mater. Sci. Forum, 207-209, 313-316 (1996)
  44. Dziedzic, D. M., Savva, I. H., Wilkinson, D. S. and Davies, J. E., Osteoconduction on, and Bonding to, Calcium Phosphate Ceramic Implants, Mater. Res. Symp. Proc. 414, 147-156 (1996)
  45. Wilkinson, D. S., Creep Mechanisms in Multiphase Ceramics, Proc. Engin. Found. Conf. on Plasticity in Ceramics, eds. J. L. Routbort, C. Brookes and R. C. Bradt, 359-68 (Plenum Press, NY, 1995).
  46. Kiser, M. T., Zok, F. W., Brockenbrough, J. R., Hunt, W. H. and Wilkinson, D. S., Deformation and Damage in a Particulate Metal Matrix Composite, in Intrinsic and Extrinsic Fracture Mechanisms in Discontinuously Reinforced Composites, eds. W. H. Hunt and J. J. Lewandowski (TMS, Warrendale PA, 1995).
  47. Ham-Su, R., Ning, X. G. and Wilkinson, D. S., Creep of SiC-Platelet Reinforced Alumina, Proc. ICCM-10, A. Poursartip and K. Street, eds. (Woodhead Publishing, Cambridge, U.K., 1995), Vol. IV, pp. 625-32
  48. Wilkinson, D. S., Creep Mechanisms in Discontinuously Reinforced Ceramic Composites, Proc. ICCM-10,A. Poursartip and K. Street, eds. (Woodhead Publixhing, Cambridge, U.K., 1995), Vol. IV, pp. 679-86
  49. Conlon, K. T. and Wilkinson, D. S., Effect of Microstructural Inhomogeneity on the Strength of Particulate Metal Matrix Composites, Proc. ICCM-10,A. Poursartip and K. Street, eds. (Woodhead Publishing, Cambridge, U.K., 1995), Vol. II, pp. 433-450
  50. Wilkinson, D. S. and Embury, J. D., Influence of Particulate Spatial Distribution on Damage Accumulation in Metals and Ceramics, Proc. IUTAM Symp. on Micromechanics of Plasticity and Damage of Multiphase Materials (1995)
  51. Conlon, K. T. and Wilkinson, D. S., Microstructural Inhomogeneity and Strength of Particulate Metal Matrix Composites, Proc. IUTAM Symp. on Micromechanics of Plasticity and Damage of Multiphase Materials (1995)
  52. Aguero, A., Korotkin, M., Sabljic D. and Wilkinson D. S., Novel Functionally Gradient Composite Materials for Critial High Performance Applications - A Feasibility Study, Report No. CATI-UDP-FGM 06-94, Cametoid Advanced Technologies Inc. (1994), prepared for the Canadian Space Agency, St. Hubert, Quebec.
  53. Wilkinson, D. S., Creep Mechanisms in Silicon Nitride Ceramics, in Tailoring of Mechanical Properties of Silicon Nitride Ceramics, eds. M. J. Hoffmann and G. Petzow, 327-338 (Kluwer, Dordrecht, The Netherlands, 1994).
  54. Bloyce, D. M., Ham-Su, R., Plucknett, K. P. and Wilkinson, D. S., Tape Casting of Platelet Reinforced Alumina, Advances in Ceramic Matrix Composites, ed. N. P. Bansal, Ceramic Transactions, 38, 67-78 (The American Ceramic Society, Westerville, OH, 1994)
  55. Pompe, W. and Wilkinson, D. S., Microstructural Design of Platelet Reinforced Ceramics, in Proc. 3rd European Conf. on Advanced Materials and Processes, Journal de Physique IV, colloque C7, eds. R. Pichoir and P. Costa, 1889-1894 (Paris, 1993)
  56. Plucknett, K. P. and Wilkinson, D. S., Transient Viscous Phase Reaction Sintering (TVPRS) for the Fabrication of Silicon Oxynitride Ceramics, in Silicon Nitride 93, eds. M. J. Hoffmann, P. F. Becher and G. Petzow, 229-238 (Trans Tech Publications, Brookfield VT, USA, 1993)
  57. Plucknett, K. P. and Wilkinson, D. S., Microstructural Characterization of Microwave Sintered Silicon Nitride Ceramics, Proc. MRS Symp. on Silicon Nitride Ceramics: Scientific and Technological Issues, eds. I. W. Chen, P. F. Becher, M. Mitomoto, G. Petzow and T. S. Yen, 287 (1993), 289-94.
  58. Plucknett, K. P. and Wilkinson, D. S., Transient Viscous Phase Reaction Sintered (TVPRS) Silicon Oxynitride Ceramics, Proc. MRS Symp. on Silicon Nitride Ceramics: Scientific and Technological Issues, eds. I. W. Chen, P. F. Becher, M. Mitomoto, G. Petzow and T. S. Yen, 287 (1993), 381-6.
  59. Tuffé, S. C., Plucknett, K. P. and Wilkinson, D. S., Processing and Mechanical Properties of Alumina Platelet Reinforced Molybdenum Disilicide Laminates, Proc. 17th Ann. Conf. on Composites and Advanced Ceramics, Ceram. Engin. and Sci. Proc, 14 [9-10], 1199-1208 (1993).
  60. Wilkinson, D. S., Creep and Damage Processes in Multi-Phase Ceramic Materials, in Critical Issues in the Development of High Temperature Structural Materials, eds. N. S. Stoloff, D. J. Duquette and A. F. Giamei (TMS-AIME, Warrandale, PA 1993), 333-348.
  61. Conlon, K. T., Corbin, S. F. and Wilkinson, D. S., The Effect of Inhomogeneous Particle Distributions on the Mechanical Properties of Metal Matrix Composites, Proc. Intl. Symp. on Developments and Applications of Ceramics and New Metal Alloys, eds. H. Mostaghaci and R. A. L. Drew, 217-228 (The Metallurgical Society of CIM, Montreal, 1993)
  62. Tuffé, S. C., Ham-Su, R., Bloyce, D. M., Plucknett, K. P. and Wilkinson, D. S., Tape-casting of Platelet Reinforced Ceramics, Proc. Intl. Symp. on Developments and Applications of Ceramics and New Metal Alloys, eds. H. Mostaghaci and R. A. L. Drew, 377-386 (The Metallurgical Society of CIM, Montreal, 1993)
  63. Wilkinson, D. S., Creep Damage Mechanisms in Structural Ceramics, in Fracture Mechanics of Ceramics (eds. R. C. Bradt, D. P. H. Hassleman, D. Munz, M. Sakai and Y. V. Shevchenko, Plenum, NY, 1992), 10, 349-66.
  64. Wilkinson, D. S., Plucknett, K. P. and Caceres, C. H., Tape Casting Using Fine Ceramic Powders, Proc. MRS Symp., 249 (1992), 305-320.
  65. Plucknett, K. P., Caceres, C. H. and Wilkinson, D. S., Tape Cast Al2O3/ZrO2 Composite Laminates, Proc. 16th Ann. Conf. on Composites and Advanced Ceramics, Ceram. Engin. and Sci. Proc., 13 [9-10] (1992), 873-80.
  66. Ham-Su, R. and Wilkinson, D. S., Strength and Flaw Elimination in Tape Cast Ceramics, Proc. 16th Ann. Conf. on Composites and Advanced Ceramics, Ceram. Engin. and Sci. Proc., 13 [9-10] (1992), 1000-1007.
  67. Grazzini, H. and Wilkinson, D. S., Slip Casting Under Pressure, Proc. 16th Ann. Conf. on Composites and Advanced Ceramics, Ceram. Engin. and Sci. Proc., 13 [9-10] (1992), 528-35.
  68. Corbin, S.F. and Wilkinson, D.S., The Onset of Yielding in a SiC(p) Reinforced Al Alloy, Proc. 12th Riso International Symp. (1991), 283-290.
  69. Robertson, B. W., Holm, C, Lin, Y.-P., Corbin, S. F. and Wilkinson, D. S., Characterization of Interfaces in SiC Particulate-Reinforced Al Alloys by AEM, Proc. MRS Symp., 170 (1990), 105-110.
  70. Wilkinson, D.S. and Chadwick, M.M., Creep Mechanisms in Silicon Nitride at Elevated Temperature, Proc. 11th Riso International Symposium (1990), 517-22.
  71. Wilkinson, D. S., Robertson, A. G. and Caceres, C. H., Creep Damage Accumulation in Hot-Pressed Alumina, Proc. 4th Intl. Conf. on Creep and Fracture of Engineering Materials and Structures, edited by B. Wilshire and R. W. Evans (Institute of Metals, 1990), 355-363.
  72. Chadwick, M. M. and Wilkinson, D. S. Effect of Annealing on Creep and Creep Fracture in Si3N4, Proc. 4th Intl. Conf. on Creep and Fracture of Engineering Materials and Structures, edited by B. Wilshire and R. W. Evans (Institute of Metals, 1990), 377-387.
  73. Wilkinson, D.S., Modeling the Effect of Material Inhomogeneity on Grain Boundary Creep Fracture, in Modeling of Material Behaviour and Design, eds. J. D. Embury and A. W. Thompson (TMS-AIME, Warrendale, PA, 1990), 199-207.
  74. Biner, S.B. and Wilkinson, D.S., Characterization of Creep Crack Growth in Pressure Vessel Steels, Proc. Intl. Conf. on Creep (1986).
  75. Wilkinson, D.S., Modeling the Effect of Microstructural Inhomogeneity on High Temperature Deformation and Fracture, Proc. CFC-19 (1989), 321-31.
  76. Corbin, S.F. and Wilkinson, D.S., Effect of Temperature on the Mechanical Behaviour of a SiC Particulate Reinforced Al Alloy, Proc. Intl. Symp. on Processing of Ceramics and Metal Matrix Composites (Pergamon, 1989), 404-411.
  77. Wilkinson, D.S., Chadwick, M. and Robertson, A.G., High Temperature Stability of Structural Ceramics, Proc. Intl. Symp. on Advanced Structural Materials (Pergamon, 1989), 131-138.
  78. Wilkinson, D.S., Chadwick, M., Jupp, R. and Robertson, A.G., Reliability of Structural Ceramics at Elevated Temperatures, Proc. Intl. Symp. on Fracture Mechanics, (Pergamon, 1988), 193-204.
  79. Burger, G., Koken, E., Wilkinson, D.S. and Embury, J.D., The Influence of Spatial Distributions on Metallurgical Processes, Advances in Phase Transitions (Pergamon Press), 247-262 (1988).
  80. Robertson, A.G. and Wilkinson, D.S., Creep Damage Accumulation in Hot-Pressed Al2O3 During Flexural Creep and Anneals in Air, Proc. 4th Intl. Symp. on Fracture Mechanics in Ceramics (1986).
  81. Robertson, A.G. and Wilkinson, D.S., High Temperature Damage Accumulation in Hot-Pressed Alumina, Science of Ceramics 13, J. de Physique-Colloque C1, suppl. au no. 2 (1986), C1-661-666.
  82. Robertson, A.G. and Wilkinson, D.S., Creep Damage Accumulation in Hot-Pressed Al2O3, Proc. of 6th World Congress on High Tech. Ceramics, (Milan, 1986).
  83. Wilkinson, D.S., Creep Damage Mechanisms in Hot-Pressed Alumina, Proc. NATO Advanced Research Workshop on Toughening Mechanisms in Quasi-Brittle Materials (Kluwer, 1991), 235-248.
  84. Biner, S.B., and Wilkinson D.S., Numerical Modeling of Creep Crack Growth, Proc. C.F.C. 11 (Martinius Nijhoff, 1985), 1-12.
  85. Burger, G. and Wilkinson, D.S., Effect of Solute Distribution on Creep Cavitation in a Ni Alloy, Proc. C.F.C. 11 (Martinius Nijhoff, 1985) 43-52.
  86. Wilkinson, D.S., Caceres, C.H. and Wu Xin, Strain-Enhanced Grain Growth During Superplastic Deformation, Proc. of ICSMA-7 (Pergamon, 1985), Vol. 2, 871-876.
  87. Wilkinson, D.S., Grain Size Effects in Superplasticity, in Superplasticity, Proc. of International Conf., Grenoble (Editions du C.N.R.S., 1985), paper no. 6.
  88. Wilkinson, D.S., Helium Effects on Mechanical Properties of Materials for Near Plasma Structures, CFFTP Contract Final Report (1985).
  89. Biner, S.B., Watt, D. and Wilkinson, D.S., A Numerical Study of Crack Tip Parameters in Creeping Solids, Proceedings of CFC10 (Canadian Fracture Conference, 1984).
  90. Wilkinson, D.S., Models of Creep Crack Growth, in Plastic Deformation of Ceramic Materials III, conference proceedings (Pergamon Press, 1984) 507- 524.
  91. Wilkinson, D.S., Gupte, K. and Biner, S.B., Models for Creep Crack Growth in Steady-State and Transient Stress Fields, Proc. of 2nd Intl. Conf. on Creep and Fracture of Engineering Materials and Structures (Pineridge Press), 949-958 (1984).
  92. Wilkinson, D.S., The Behaviour of Superplastic Materials at Large Strains, Proc. of 2nd. Intl. Conf. on Creep and Fracture of Engineering Materials and Structures (Pineridge Press), 223-234 (1984).
  93. Wilkinson, D.S. and Biner, S.B., The Application of Fracture Mechanics to Creep Crack Growth in Pressure Vessel Steels, D.S.S. Contract 05SU.23440-0-09199, Final Report (1984).
  94. Wilkinson, D.S., Steady State Crack Growth in Creeping Solids, in Advances in Life Prediction Methods, conference proceedings, eds. D.A. Woodford and J.R. Whitehead (ASME), 259-267 (1983).
  95. Biner, S.B., Watt, D. and Wilkinson, D.S., Validity of Crack Tip Parameters in Creeping Solids, Fall Meeting of ASME, Boston, MA. (1983).
  96. Wilkinson, D.S., Creep Crack Growth in Pressure Vessel Steels, Proceedings of CFC5 (Canadian Fracture Conference), Pergamon Press, 75-84 (1982).
  97. Caceres, C.H. and Wilkinson, D.S., Damage Accumulation During Superplastic Flow. The Role of Inclusions (poster), abstract published in Proceedings of the International Conference on Superplastic Forming, San Diego (1982).
  98. Wilkinson, D.S. and Vitek, V., The Stress Analysis and Diffusional Growth of Microvoids Ahead of a Crack, in Cavities and Cracks in Creep and Fatigue, ed. J. Gittus (Applied Science), 243-258 (1981).
  99. Pope, D.P. and Wilkinson, D.S., Grain Boundary Impurity Effects on the Creep Ductility of Ferritic Steels, Proc. 1st Intl. Conf. on Creep and Fracture of Engineering Materials and Structures (Pineridge), 531-544 (1981).
  100. Wilkinson, D.S., Models for Intergranular Crack Growth by Diffusion, Proc. 1st Intl. Conf. on Creep and Fracture of Engineering Materials and Structures (Pineridge), 315-328 (1981).
  101. Wilkinson, D.S., Materials and Design for Resistance to Crack Growth by Creep, D.S.S. Contract Report (1981).
  102. Vitek, V. and Wilkinson, D.S., Intergranular Crack Growth at High Temperatures, Proc. 5th Inter. Conf. on the Strength of Metals and Alloys, Aachen, Pergamon Press, pp. 321-327 (1979).
  103. Wilkinson, D.S. and Ashby, M.F., The Development of Pressure Sintering Maps, presented at the 4th International Conference on Sintering and Related Phenomena, University of Notre Dame, May 1975, proceedings published by Plenum Press.

Books

  1. Written
    Wilkinson, D. S., Mass Transport in Solids and Fluids (Cambridge University Press, 2000), 292pp., ISBN 0 521 62409 6
  2. Edited
    Proceedings of the Embury Symposium, G.R. Purdy and D.S. Wilkinson eds., special issue of Philosophical Magazine, 85 (2005)

    Advances in Industrial Materials, Proceedings of an International Symposium, D. S. Wilkinson, W. J. Poole and A. Alpas eds. (The Metallurgical Society of CIM, Montreal, 1998)

    Advances in Crystal Plasticity, Proceedings of a Symposium held in honour of Prof. Z. S. Basinski, D. S. Wilkinson and J. D. Embury eds. (The Metallurgical Society of CIM, Montreal, 1993)

    Proceedings of an International Symposium on Advanced Structural Materials, D. S. Wilkinson ed. (Pergamon Press, New York, 1989)